TCLT1600_15 Datasheet, PDF (3/7 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, AC Input, SOP-4L, Long Mini-Flat Package

www.vishay.com
TCLT1600
Vishay Semiconductors
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Partial discharge test voltage - routine test
Partial discharge test voltage -
lot test (sample test)
Isolation test voltage (RMS)
Insulation resistance
Forward current
Power dissipation
Rated impulse voltage
Safety temperature
Clearance distance
100 %, t_test = 1 s
t_Tr = 60 s, t_test = 10 s,
(see figure 2)
V_IO = 500 V
V_IO = 500 V, T_amb = 100 °C
V_IO = 500 V, T_amb = 150 °C
(construction test only)
V_pd
V_IOTM
V_pd
V_ISO
R_IO
R_IO
R_IO
I_si
P_SO
V_IOTM
T_si
2
8
1.68
5000
10¹²
10¹¹
10⁹
130
265
8
150
8.00
kV
kV
kV
V_RMS
Ω
Ω
Ω
mA
mW
kV
°C
mm
Creepage distance
Insulation distance (internal)
8.00
mm
0.40
mm
Note
• According to DIN EN 60747-5-2 (VDE 0884) (see figure 2). This optocoupler is suitable for safe electrical isolation only within the safety
ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits.
300
250
Phototransistor
P_SO (mW)
200
150
100
V_IOTM
V_pd
V_IOWM
V_IORM
t₁, t₂ = 1 s to 10 s
t₃, t₄ = 1 s
t_test = 10 s
t_stres = 12 s
50
IR-diode
I_SI (mA)
0
0 25 50 75 100 125 150
T_SI - Safety Temperature (°C)
0
13930
t₁
t_Tr = 60 s
t₃ t_test t₄
t₂ t _stres
t
Fig. 1 - Derating Diagram
Fig. 2 - Test Pulse Diagram for Sample Test according to
DIN EN 60747-5-2; IEC60747-5-5
SWITCHING CHARACTERISTICS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL MIN.
Delay time
V_S = 5 V, I_C = 2 mA, R_L = 100 Ω,
(see figure 3)
t_d
-
Rise time
V_S = 5 V, I_C = 2 mA, R_L = 100 Ω,
(see figure 3)
t_r
-
Turn-on time
V_S = 5 V, I_C = 2 mA, R_L = 100 Ω,
(see figure 3)
t_on
-
Storage time
V_S = 5 V, I_C = 2 mA, R_L = 100 Ω,
(see figure 3)
t_s
-
Fall time
V_S = 5 V, I_C = 2 mA, R_L = 100 Ω,
(see figure 3)
t_f
-
Turn-off time
V_S = 5 V, I_C = 2 mA, R_L = 100 Ω,
(see figure 3)
t_off
-
Turn-on time
V_S = 5 V, I_F = 10 mA, R_L = 1 kΩ,
(see figure 4)
t_on
-
Turn-off time
V_S = 5 V, I_F = 10 mA, R_L = 1 kΩ,
(see figure 4)
t_off
-
TYP.
3
3
6
0.3
4.7
5
9
10
MAX.
-
-
-
-
-
-
-
-
UNIT
μs
μs
μs
μs
μs
μs
μs
μs
Rev. 2.5, 13-Oct-15
3
Document Number: 83517
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000