TCLT1600_15 Datasheet, PDF (2/7 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, AC Input, SOP-4L, Long Mini-Flat Package

www.vishay.com
TCLT1600
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Forward current
Forward surge current
Power dissipation
Junction temperature
OUTPUT
t_p ≤ 10 μs
I_F
± 60
mA
I_FSM
± 1.5
A
P_diss
100
mW
T_j
125
°C
Collector emitter voltage
Emitter collector voltage
Collector current
Collector peak current
Power dissipation
Junction temperature
COUPLER
t_p/T = 0.5, t_p ≤ 10 ms
V_CEO
70
V
V_ECO
7
V
I_C
50
mA
I_CM
100
mA
P_diss
150
mW
T_j
125
°C
Total power dissipation
Operating ambient temperature range
Storage temperature range
Soldering temperature ⁽¹⁾
P_tot
250
mW
T_amb
-55 to +100
°C
T_stg
-55 to +125
°C
T_sld
260
°C
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) _{Wave soldering three cycles are allowed. Also refer to “Assembly Instruction” (www.vishay.com/doc?80054).}
ELECTRICAL CHARACTERISTICS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Junction capacitance
OUTPUT
I_F = ± 50 mA
V_R = 0 V, f = 1 MHz
V_F
-
1.25
1.6
V
C_j
-
50
-
pF
Collector emitter voltage
Emitter collector voltage
Collector ermitter leakage current
COUPLER
I_C = 1 mA
I_E = 100 μA
V_CE = 20 V, I_F = 0 A
V_CEO
70
V_ECO
7
I_CEO
-
-
-
V
-
-
V
10
100
nA
Collector emitter saturation voltage
I_F = ± 10 mA, I_C = 1 mA
V_CEsat
-
Cut-off frequency
V_CE = 5 V, I_F = ± 10 mA,
R_L = 100 Ω
f_c
-
Coupling capacitance
f = 1 MHz
C_k
-
-
0.3
V
110
-
kHz
0.3
-
pF
Note
• Minimum and maximum values are tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
I_C/I_F
V_CE = 5 V, I_F = ± 5 mA
CTR
80
TYP.
-
MAX.
300
UNIT
%
Rev. 2.5, 13-Oct-15
2
Document Number: 83517
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000