SI9200 Datasheet, PDF (3/6 Pages) Vishay Siliconix – CAN Bus Driver and Receiver

Si9200
Vishay Siliconix
SPECIFICATIONS
Parameter
Symbol
Test Conditions Unless Otherwise Specified
Limits
V_DD = 4.75 V to 5.25 V
T_A =- 40 V to 125 °C
Min.^b
Typ.^c
Max.^b Unit
Dynamic
Propagation Delay -
TX to V_DIFF High
t_ON-TX
50
Propagation Delay -
TX to V_DIFF Low
Propagation Delay -
TX to Receive Low
t_OFF-TX
t_ON-RX
50
ns
120
Propagation Delay -
TX to Receive High
t_OFF-RX
120
Supply
Suppply Current
I_DD
TX = V_INH, V_DD = 5.25 V, R_L = 60 (Recessive)
TX = V_INL, V_DD = 5.25 V, R_L = 60 (Dominant)
40
25
mA
75
Transient^c
Electrostatic
Discharge
Human Body Model
V_ESD
C_L = 100 pF, R_L = 1500 
MIL-STD-883D, Method 3015
2000
V
Bus Transient Voltage
V_TRANS
R_S = 1000 , 1 ms
- 60
60
Protection
Thermal Trip Point^c
Thermal Hysteresis^c
T_TRP
T_HYS
150
165
10
20
180
°C
30
Notes:
a. Typical values are for DESIGN AID ONLY at T_A = 25 °C, not guaranteed nor subject to production testing.
b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum.
c. Guaranteed by design, not subject to production test.
Truth Table
TX
Low
High (or Floating)
High (or Floating)
Mode
Transmit
Transmit and Receive
Receive
Bus State
Dominant
Recessive
Recessive
CAN_H
High
Floating
High
CAN_L
Low
Floating
Low
RX
Low
High
Low
Document Number: 70015
www.vishay.com
S11-0975-Rev. D, 16-May-11
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000