SI9200 Datasheet, PDF (2/6 Pages) Vishay Siliconix – CAN Bus Driver and Receiver

Si9200
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS^a
Parameter
Operating Temperature (T_A)
Junction and Storage Temperature
Voltage On Any Pin (except CAN_H and CAN_L) with Respect to Ground
Voltage On CAN_H and CAN_L with Respect to Ground
Supply Voltage, V_DD
Continuous Output Current
Thermal Ratings^b: R_thJA
Limit
Unit
- 40 to 125
°C
- 55 to 150
- 0.3 to V_DD + 0.3
- 3 to 16
V
- 0.3 to 12
± 100
mA
62.5 (no airflow)
°C
Notes:
a. Extended exposure to the absolute maximum ratings or stresses beyond these ratings may affect device reliability or may cause permanent
damage to the device. Functional operation at conditions other than the recommended operating conditions is not implied.
b. Mounted on 1-IN², FR4 PC Board.
RECOMMENDED OPERATING RANGE
Parameter
V_DD
Bus Load Resistance
Limit
Unit
4.75 to 5.25
V
60

SPECIFICATIONS
Parameter
Input
TX Input Voltage High
TX Input Voltage Low
TX Input Current Low
TX Input Current High
Output
Bus Recessive
Bus Dominant
Reference Output
Receive Output
(Bus Recessive
Conditions)
Receive Output
(Bus Dominant
Conditions)
Internal Resistance
from Bus Pins
Internal Capacitance
from Bus Pins^c
Symbol
V_INH
V_INL
I_IL
I_IH
V_{CAN_HR,} V_{CAN_LR}
V_DIF =
V_{CAN_HR} - V_{CAN_LR}
V_{CAN_HD}
V_{CAN_LD}
V_DIF =
V_{CAN_HD} - V_{CAN_LD}
V_REF
V_RXH
V_RXL
R_IN, BUS_L
R_IN, BUS_H
R_DIFF
C_IN
(CAN_H,
CAN_L)
Test Conditions Unless Otherwise Specified
V_DD = 4.75 V to 5.25 V
Limits
T_A = - 40 V to 125 °C
Min.^b
Typ.^c
Max.^b
4
1
TX = 0 V
- 50
-2
TX = V_DD
-1
1
TX = V_INH, R_L = 
2
2.5
3
- 0.5
0
0.05
TX = V_INL, R_L = 60 
2.75
3.5
4.5
0.5
1.5
2.25
1.5
2
3
- 25 µA  I_REF  25 µA
0.5 V_DD - 0.2
TX = V_INH
- 2  V_{CAN_H}, V_{CAN_L}  7
- 1  V_{CAN_H} - V_{CAN_L} 
0.5 (Bus Recessive)
I_OUT = - 10 µA
I_OUT = - 100 µA
I_OUT = - 2 mA
V_DD - 0.3
V_DD - 1
V_DD - 1.75
TX = V_INH
- 0.8  V_{CAN_H}  7
- 2  V_{CAN_L}  5.8
0.9  V_{CAN_H} - V_{CAN_L}  5
( Bus Dominant)
I_OUT = 10 µA
I_OUT = 100 µA
I_OUT = 2 mA
5
5
TX = V_INH (Recessive)
10
0.5 V_DD
V_DD - 0.05
V_DD - 0.2
V_DD - 1
0.05
0.2
1
0.5 V_DD + 0.2
0.3
1
1.75
50
50
100
50
Unit
V
µA
V
k
pF
www.vishay.com
Document Number: 70015
2
S11-0975-Rev. D, 16-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000