DG611A Datasheet, PDF (3/11 Pages) Vishay Siliconix – 1 pC Charge Injection, 100 pA Leakage, Quad SPST Switches

New Product
DG611A/DG612A/DG613A
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS T_A = 25 °C, unless otherwise noted
Parameter
Limit
Unit
V+ to V-
14
GND to V-
Digital Inputs^a, V_S, V_D
7
V
(V-) - 0.3 V to (V+) + 0.3 V
or 30 mA, whichever occurs first
Continuous Current (Any Terminal)
Peak Current, S or D (Pulsed 1 ms, 10 % Duty Cycle)
30
mA
100
Storage Temperature
- 65 to 150
°C
16-Pin TSSOP^c
450
Power Dissipation (Package)^b
16-Pin miniQFN^d
525
mW
16-Pin Narrow SOIC^e
640
16-Pin TSSOP
178
Thermal Resistance (Package)^b
16-Pin miniQFN
152
°C/W
16-Pin Narrow SOIC
125
Notes:
a. Signals on SX, DX, or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC Board.
c. Derate 5.6 mW/°C above 70 °C.
d. Derate 6.6 mW/°C above 70 °C.
e. Derate 8.0 mW/°C above 70 °C.
f. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead terminal
is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be
guaranteed and is not required to ensure adequate bottom side solder interconnection.
Document Number: 69904
S-72760-Rev. A, 04-Feb-08
www.vishay.com
3