DG408LE Datasheet, PDF (3/18 Pages) Vishay Siliconix – 8-Ch / Dual 4-Ch High Performance Analog Multiplexers

www.vishay.com
DG408LE, DG409LE
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
PARAMETER
LIMIT
UNIT
V+ to V- ^e
18
GND to V-
-18
V
Digital Inputs ^a, V_S, V_D
Current (any terminal)
Peak Current, S or D (pulsed at 1 ms, 10 % duty cycle max.)
(V-) - 0.3 to (V) + 0.3
30
mA
100
Storage Temperature
(D suffix)
-65 to +125
°C
16-pin plastic TSSOP ^c
600
Power Dissipation (package) ^b
16-pin narrow SOIC ^c
600
mW
16-pin miniQFN ^d
1385
ESD Human Body Model (HBM); per ANSI / ESDA / JEDEC^® JS-001
2500
V
Latch Up Current, per JESD78D
300
mA
Notes
a. Signals on S_X, D_X, A_X, or EN exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads soldered or welded to PC board.
c. Derate 8 mW/°C above 75 °C.
d. Derate 17.3 mW/°C above 70 °C
e. Also applies when V- = GND
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
S16-0389-Rev.A, 07-Mar-16
3
Document Number: 78084
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000