CNY651 Datasheet, PDF (3/10 Pages) Vishay Siliconix – Optocoupler, Phototransistor Output, Very High Isolation Voltage

www.vishay.com
CNY651 Series
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Junction capacitance
OUTPUT
I_F = 50 mA
V_F
V_R = 0 V, f = 1 MHz
C_j
1.32
1.6
V
50
pF
Collector emitter voltage
Emitter collector voltage
Collector emitter leakage current
COUPLER
I_C = 1 mA
I_E = 100 μA
V_CE = 20 V, I_F = 0 mA
V_CEO
32
V_ECO
7
I_CEO
V
V
200
nA
Collector emitter saturation voltage
Cut-off frequency
Coupling capacitance
I_F = 10 mA, I_C = 1 mA
V_CE = 5 V, I_F = 10 mA, R_L = 100 Ω
f = 1 MHz
V_CEsat
f_c
C_k
0.3
V
110
kHz
0.3
pF
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO (T_amb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
BIN
SYMBOL MIN.
AY.
CTR
50
I_C/I_F
V_CE = 5 V, I_F = 5 mA
AGR.
CTR
100
TYP.
MAX.
150
300
UNIT
%
%
SAFETY AND INSULATION RATINGS
PARAMETER
MAXIMUM SAFETY RATINGS
Output safety power
Input safety current
Safety temperature
Comparative tracking index
INSULATION RATED PARAMETERS
Maximum withstanding isolation voltage
Maximum transient isolation voltage
Maximum repetitive peak isolation voltage
Insulation resistance
T_amb = 25 °C, V_DC = 500 V
Isolation resistance
T_amb = 100 °C, V_DC = 500 V
Climatic classification (according to IEC 68 part 1)
Environment (pollution degree in accordance to DIN VDE 0109)
Creepage
Insulation thickness
SYMBOL
P_SO
I_si
T_S
CTI
V_ISO
V_IOTM
V_IORM
R_IO
R_IO
DTI
VALUE
250
120
150
475
8200
12 000
1450
≥ 10¹²
≥ 10¹¹
40/110/21
2
≥ 14
3
UNIT
mW
mW
°C
V_RMS
V_peak
V_peak
Ω
Ω
mm
mm
Note
• According to DIN EN 60747-5-5 (see figure 2). This optocoupler is suitable for safe electrical isolation only within the safety ratings.
Compliance with the safety ratings shall be ensured by means of suitable protective circuits.
Rev. 1.0, 12-Feb-14
3
Document Number: 82566
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000