BFC238330224 Datasheet, PDF (24/26 Pages) Vishay Siliconix – AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type

Not Recommended for New Design, Use New MMKP383
MMKP 383
Vishay BCcomponents ^{AC and Pulse Double Metallized Polypropylene}
Film Capacitors MMKP Radial Potted Type
SUB-CLAUSE NUMBER AND TEST
SUB-GROUP C1B OTHER PART OF
SAMPLE OF SUB-GROUP C1
4.7.2 Final inspection
4.9
Shock
4.9.3 Final measurements
SUB-GROUP C1 COMBINED SAMPLE OF
SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.10 Climatic sequence
4.10.2 Dry heat
4.10.3 Damp heat cyclic
Test Db, first cycle
4.10.4 Cold
4.10.6 Damp heat cyclic
Test Db, remaining cycles
4.10.6.2 Final measurements
SUB-GROUP C2
4.11 Damp heat steady state
4.11.1 Initial measurements
4.11.3 Final measurements
CONDITIONS
Visual examination
Mounting:
See section “Mounting” for more information
Pulse shape: Half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
Visual examination
Capacitance
Tangent of loss angle
Insulation resistance
Temperature: + 105 °C
Duration: 16 h
Temperature: - 55 °C
Duration: 2 h
Voltage proof = U_Rdc for 1 min within 15 min
after removal from testchamber
Visual examination
Capacitance
Tangent of loss angle
Insulation resistance
56 days, 40 °C, 90 % to 95 % RH
no load
Capacitance
Tangent of loss angle at 1 kHz
Voltage proof = U_Rdc for 1 min within 15 min
after removal from testchamber
Visual examination
Capacitance
Tangent of loss angle
Insulation resistance
PERFORMANCE REQUIREMENTS
No visible damage
No visible damage
C/C|  1 % of the value measured in 4.6.1
Increase of tan 
 0.0005 for: C  100 nF or
 0.001 for: 100 nF < C  470 nF or
 0.0015 for: C  470 nF
Compared to values measured in 4.6.1
As specified in section “Insulation
Resistance” of this specification
No breakdown of flash-over
No visible damage
Legible marking
For original pitch = 22.5 mm and 27.5 mm:
C/C|  3 % of the value measured in
4.4.2 or 4.9.3
Increase of tan 
 0.0005 for: C  100 nF or
 0.001 for: 100 nF < C  470 nF or
 0.0015 for: C  470 nF
Compared to values measured in 4.3.1 or
4.6.1
 50 % of values specified in section
“Insulation Resistance” of this specification
No breakdown of flash-over
No visible damage
Legible marking
|C/C|  1 % of the value measured in
4.11.1.
Increase of tan 
 0.0005 for: C  100 nF or
 0.001 for: 100 nF < C  470 nF or
 0.0015 for: C  470 nF
Compared to values measured in 4.11.1
 50 % of values specified in section
“Insulation Resistance” of this specification
www.vishay.com
For technical questions, contact: [e-mail]
Document Number: 28124
210
Revision: 19-Mar-13
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000