BFC238330224 Datasheet, PDF (15/26 Pages) Vishay Siliconix – AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type

Not Recommended for New Design, Use New MMKP383
MMKP 383
AC and Pulse Double Metallized Polypropylene _{Vishay BCcomponents}
Film Capacitors MMKP Radial Potted Type
MOUNTING
Normal Use
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for
mounting on printed-circuit boards by means of automatic insertion machines.
For detailed tape specifications refer to “Packaging Information” www.vishay.com/docs?28139
Specific Method of Mounting to Withstand Vibration and Shock
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the
printed-circuit board:
 For original pitch 15 mmthe capacitors shall be mechanically fixed by the leads
 For larger pitches the capacitors shall be mounted in the same way and the body clamped
Space Requirements on Printed-Circuit Board
The maximum length and width of film capacitors is shown in the drawing:
 Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned
 Product height with seating plane as given by “IEC 60717” as reference: h_max.  h + 0.3 mm
Eccentricity
b_max. = b + 0.3 mm
I_max. = I + 0.3 mm
Storage Temperature
 Storage temperature: T_stg = - 25 °C to + 40 °C with RH maximum 80 % without condensation
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure
of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Document Number: 28124
For technical questions, contact: [e-mail]
www.vishay.com
Revision: 19-Mar-13
201
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000