English
Language : 

SI9135 Datasheet, PDF (2/14 Pages) Vishay Siliconix – SMBus Multi-Output Power-Supply Controller
Si9135
Vishay Siliconix
New Product
ABSOLUTE MAXIMUM RATINGS
VIN to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to +36 V
PGND to GND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±2 V
VL to GND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to +6.5 V
BST3, BST5, BSTFY to GND . . . . . . . . . . . . . . . . . . . -0.3 V to +36 V
VL Short to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous
LX3 to BST3; LX5 to BST5; LXFY to BST . . . . . . . . . . . -6.5 V to 0.3 V
Inputs/Outputs to GND
(SYNC, CS3, CS5, CSP, CSN) . . . . . . . . . . . . . . -0.3 V to (VL +0.3 V)
SDA, SCL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to +5.5 V
DL3, DL5, DLFY to PGND . . . . . . . . . . . . . . . . . -0.3 V to (VL +0.3 V)
DH3 to LX3, DH5 to LX5,
DHFY to LXFY . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to (BSTX +0.3 V)
Continuous Power Dissipation (TA = 90°C)a
28-Pin SSOPb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 572 mW
Operating Temperature Range. . . . . . . . . . . . . . . . . . . . . 0°C to 90°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . -40°C to 125°C
Lead Temperature (Soldering, 10 Sec.) . . . . . . . . . . . . . . . . . . . 300°C
Notes
a. Device mounted with all leads soldered or welded to PC board.
b. Derate 9.52 mW/°C above 90°C.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
SPECIFICATIONS
Parameter
3.3-V Buck Controller
Total Regulation (Line, Load, and
Temperature)
Line Regulation
Load Regulation
Current Limit
Bandwidth
Phase Margin
5-V Buck Controller
Total Regulation (Line, Load, and
Temperature)
Line Regulation
Load Regulation
Current Limit
Bandwidth
Phase Margin
12-V Flyback Controller
Total Regulation (Line, Load, and
Temperature)
Line Regulation
Load Regulation
Current Limit
Bandwidth
Phase Margin
Internal Regulator
VL Output
VL Fault Lockout Voltage
VL Fault Lockout Hysteresis
VL /FB5 Switchover Voltage
VL /FB5 Switchover Hysteresis
Test Conditions
VIN = 15 V , IVL = IREF = 0 mA
TA = 0°C to 90°C, All Converters ON
Mina
Limits
Typb
Maxa
Unit
VIN = 6 to 30 V, 0 < VCS3 - VFB3 < 90 mV
VIN = 6 to 30 V
0 < VCS3 - VFB3 < 90 mV
VCS3 - VFB3
L = 10 µH, C = 330 µF
RSENSE = 20 mΩ
3.23
3.33
3.43
V
±0.5
%
±0.5
90
125
160
mV
50
kHz
65
°
VIN = 6 to 30 V, 0 < VCS5 - VFB5 < 90 mV
VIN = 6 to 30 V
0 < VCS5 - VFB5 < 90 mV
VCS5 - VFB5
L = 10 µH, C = 330 µF
RSENSE = 20 mΩ
4.88
5.03
5.18
V
±0.5
%
±0.5
90
125
160
mV
50
kHz
65
°
VIN = 6 to 30 V, 0 < VCSP - VCSN < 300 mV
VIN = 6 to 30 V
0 < VCSP - VFBN < 300 mV
VCSP - VCSN
L = 10 µH, C = 100 µF
RSENSE = 100 mΩ, Ccomp = 120 pF
All Converters OFF, VIN >5.5 V, 0 <IL <30 mA
11.4
12.0
12.6
V
±0.5
%
±0.5
330
410
500
mV
10
kHz
65
°
4.7
5.5
V
3.6
4.2
75
mV
4.2
4.7
V
75
mV
S-60752—Rev. B, 05-Apr-99
2
FaxBack 408-970-5600, request 70817
www.siliconix.com