HCTFCP Datasheet, PDF (2/5 Pages) Vishay Siliconix – Suitable for insert assembly systems

www.vishay.com
HCTF CP Series
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION ⁽¹⁾
PART NUMBER: HCTF235L150000BR00
H
C
T
F
2
3
5
L
1
5
0
0
0
0
B
R
0
0
TYPE/
FUNCTIONING
TEMPERATURE
TOLERANCE
SPECIAL
HCTF235
L = ± 15 °C
1 digit
1 = Clamp
PRODUCT DESCRIPTION: HCTF 235 15 °C CP BR 50A0
HCTF
235
15 °C
CURRENT
Current in mA.
50000 = 50 A
PACKAGING
BR
SPECIAL
Up to 2 digits
00 = Standard
CP
BR
50A0
TYPE
HCTF
FUNCTIONING
TEMPERATURE
235
TOLERANCE
± 15 °C
SPECIAL
CP = Clamp
PACKAGING
BR
RATED CURRENT VALUE
50A0 = 50 A
Note
(1) _{Products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION}
PACKAGING
TYPE
HCTF CP
CODE
BR
QUANTITY
750
CARRIER TAPE
Blister tape
acc. IEC 60286-3
Type III
WIDTH
44 mm
PITCH
12 mm
REEL
DIAMETER
360 mm/14.2"
ASSEMBLY
The high current thermal fuse HCTF 235 CP is suitable for processing on automatic insert assembly systems e.g. into clamp or
crimp terminations. Any deformation and overheating of the component body to levels above the holding temperature has to
be avoided during the assembly.
The HCTF 235 CP complies with the JIG 101 list of legal restrictions on hazardous substances.
This includes full compliance with the following directives:
• 2000/53/EC End of Life Vehicle Directive (ELV) and Annex II (ELV II)
• 2011/65/EU Restriction of the use of Hazardous Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment Directive (WEEE)
RELATED PRODUCTS
A version for automatic electric resistance welding assembly systems is available, too. See the datasheet:
• HCTF 235 Series: www.vishay.com/doc?28798
Revision: 10-Apr-13
2
Document Number: 28850
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000