HCTFCP Datasheet, PDF (1/5 Pages) Vishay Siliconix – Suitable for insert assembly systems

www.vishay.com
HCTF CP Series
Vishay Beyschlag
High Current Thermal Fuse
The HCTF CP series is especially designed for high current
applications with an operating temperature up to 160 °C. In
case of excess heat in the range of the functioning
temperature of (235 ± 15) °C the thermo fuse opens
automatically and disconnects the circuit. Typical
applications are automotive power electronics that are
connected to steady battery power (B+ or terminal
number 30).
FEATURES
• Functioning temperature: _F = (235 ± 15) °C
• Holding temperature: _H = 160 °C
• Current:  50 A
• Suitable for insert assembly systems
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Automotive
- Fan control units
- ABS
- Diesel glow plug relays
- Diesel pre-heaters
- Electric coolant pumps
TECHNICAL SPECIFICATIONS
DESCRIPTION
Functioning temperature _F
Holding temperature _H (1000 h)
Voltage U_DC
Current I_DC ⁽¹⁾
Cold resistance R_cold
Residual resistance R_s
Note
(1) _{Current rating depends on external thermal management.}
DIMENSIONS
HCTF 235 CP
(235 ± 15) °C
160 °C
24 V
 50 A
 0.1 m
> 1 M
W₁
W₂
D₁
D₂
DIMENSIONS - Mass and relevant physical dimensions
TYPE
W₁
(mm)
W₂
(mm)
HCTF CP
26 ± 0.5
6.5 ± 0.5
Note
(2) _{Between sleek surfaces}
D₁ ⁽²⁾
(mm)
7.7 ± 0.3
D₂
(mm)
1.8 ± 0.2
MASS
(g)
1.45 ± 0.3
Revision: 10-Apr-13
1
Document Number: 28850
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000