English
Language : 

DG3516 Datasheet, PDF (2/10 Pages) Vishay Siliconix – 300-MHz, 2.5-Ω, Dual SPDT Analog Switches
DG3516/DG3517
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
Parameter
Limit
Unit
Reference V+ to GND
IN, COM, NC, NOa
- 0.3 to + 6
V
- 0.3 to (V+ + 0.3 V)
Continuous Current (NO, NC, COM)
Peak Current (Pulsed at 1 ms, 10 % duty cycle)
± 100
mA
± 200
Storage Temperature
Package Solder Reflow Conditionsb
(D Suffix)
IR/Convection
- 65 to 150
°C
250
ESD per Method 3015.7
>2
kV
Power Dissipation (Packages)c
MICRO FOOT: 10 Bump (4 x 3 mm)d
457
mW
Notes:
a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. Refer to IPC/JEDEC (J-STD-020B)
c. All bumps welded or soldered to PC Board.
d. Derate 5.7 mW/°C above 70 °C.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
SPECIFICATIONS (V+ = 3 V)
Parameter
Analog Switch
Analog Signal Ranged
On-Resistanced
rON Flatnessd
On-Resistance
Match Between Channelsd
Switch Off Leakage Current
Symbol
VNO, VNC,
VCOM
rON
rON
Flatness
ΔrDS(on)
INO(off)
INC(off)
ICOM(off)
Test Conditions
Otherwise Unless Specified
V+ = 2.7 to 3.6 V, VIN = 0.5 V or 1.4 Ve
V+ = 2.7 V
INO, INC = 10 mA
VCOM = 1.5 V
VCOM = 1, 1.5, 2 V
VCOM = 1.5 V
V+ = 3.3 V,
VNO, VNC = 0.3 V/3 V, VCOM = 3 V/0.3 V
Channel-On Leakage Current
Digital Control
Input High Voltaged
Input Low Voltage
Input Capacitance
Input Current
ICOM(on)
V+ = 3.3 V, VNO, VNC = VCOM = 0.3 V/3 V
VINH
VINL
Cin
IINL or IINH
VIN = 0 or V+
Tempa
Limits
- 40 to 85 °C
Minb Typc Maxb
Unit
Full
0
V+
V
Room
Full
2.5
3.5
3.8
Room
0.52 1.0
Ω
Room
Room - 2
Full
- 20
Room - 2
Full
- 20
Room - 2
Full
- 20
0.25
2
20
2
nA
20
2
20
Full
1.4
Full
V
0.5
Full
5
pF
Full
1
1
µA
www.vishay.com
2
Document Number: 73404
S-70853-Rev. C, 30-Apr-07