DG2788_11 Datasheet, PDF (2/10 Pages) Vishay Siliconix – Low Voltage, Low On-Resistance, Dual DPDT/Quad SPDT Analog Switch

DG2788, DG2789
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS (T_A = 25 °C, unless otherwise noted)
Parameter
Symbol
Limit
Unit
Reference to GND
V+
IN, COM, NC, NO^a
- 0.3 to 5.0
V
- 0.3 to (V+ + 0.3)
Current (Any terminal except NO, NC or COM)
30
Continuous Current (NO, NC, or COM)
± 300
mA
Peak Current (Pulsed at 1 ms, 10 % duty cycle)
± 500
Storage Temperature (D Suffix)
Package Solder Reflow Conditions^d
Power Dissipation (Packages)^b
miniQFN-16
miniQFN-16^c
- 65 to 150
°C
250
525
mW
Notes:
a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 6.6 mW/°C above 70 °C
d. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead terminal
is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be
guaranteed and is not required to ensure adequate bottom side solder interconnection.
www.vishay.com
2
Document Number: 73863
S11-0303-Rev. E, 28-Feb-11