DG2788A Datasheet, PDF (2/10 Pages) Vishay Siliconix – Low Capacitance, Dual DPDT / Quad SPDT Analog Switch

www.vishay.com
DG2788A
Vishay Siliconix
ORDERING INFORMATION
TEMPERATURE RANGE
-40 °C to +85 °C lead (Pb)-free
PACKAGE
miniQFN-16
PART NUMBER
DG2788ADN-T1-GE4
MIN. ORDER / PACK. QUANTITY
Tape and reel, 3000 units
ABSOLUTE MAXIMUM RATINGS (T_A = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
Reference to GND
V+
IN, COM, NC, NO ^a
Current (any terminal except NO, NC, or COM)
Continuous current (NO, NC, or COM)
Peak current (pulsed at 1 ms, 10 % duty cycle)
Storage temperature (D suffix)
Package solder reflow conditions ^d
miniQFN-16
Power dissipation (packages) ^b
miniQFN-16 ^c
LIMIT
-0.3 to +6
-0.3 to (V+ + 0.3)
30
± 300
± 500
-65 to +150
250
525
UNIT
V
mA
°C
mW
Notes
a. Signals on NC, NO, or COM, or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 6.6 mW/°C above 70 °C.
d. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead
terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip
cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection.
S16-1836-Rev. B, 12-Sep-16
2
Document Number: 79391
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000