DG2706 Datasheet, PDF (2/8 Pages) Vishay Siliconix – High Speed, Low Voltage, 3 Ω, Quad SPDT CMOS Analog Switch

DG2706
Vishay Siliconix
TRUTH TABLE DG2706 QUAD SPDT, miniQFN-16L
Select Input
On Switches
IN1 (Pin 10)
IN2 (Pin 3)
Description (Pin)
0
X
NC1 (Pin 1)
1
X
NO1 (Pin 15)
0
X
NC4 (Pin 14)
1
X
NO4 (Pin 12)
0
NC2 (Pin 6)
X
1
NO2 (Pin 4)
0
NC3 (Pin 9)
X
1
NO3 (Pin 7)
Common (Pin)
COM1 (Pin 16)
COM4 (Pin 13)
COM2 (Pin 5)
COM3 (Pin 3)
ABSOLUTE MAXIMUM RATINGS T_A = 25 °C, unless otherwise noted
Parameter
Limit
Unit
Reference to GND
V+
IN, COM, NC, NO^a
- 0.3 to 5.0
V
- 0.3 to (V+ + 0.3)
Current (Any terminal except NO, NC or COM)
30
Continuous Current (NO, NC, or COM)
± 250
mA
Peak Current (Pulsed at 1 ms, 10 % Duty Cycle)
± 500
Storage Temperature (D Suffix)
Thermal Resistance (Package)^b
Power Dissipation (Package)^b
miniQFN-16
miniQFN-16^{c, d}
- 65 to 150
152
525
°C
°C/W
mW
Notes:
a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC board.
c. Derate 6.6 mW/°C above 70 °C
d. Manual soldering with iron is not recommended for leadless components. The miniQFN-16 is a leadless package. The end of the lead terminal
is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper lip cannot be
guaranteed and is not required to ensure adequate bottom side solder interconnection.
www.vishay.com
2
Document Number: 68392
S-80991-Rev. A, 05-May-08