DFP14 Datasheet, PDF (2/2 Pages) Vishay Siliconix – Thick Film Resistor Networks Flat Pack, 11, 12 Schematics

Thick Film Resistor, Networks, Flat Pack
DFP
Vishay Dale
DIMENSIONS in inches [millimeters]
Pin #1
0.050
[1.27]
Typ.
0.019 ± 0.006
[0.48 ± 0.15]
0.365 [9.27] Min.
0.385 [9.78] Max.
0.265 [6.73] Max.
GLOBAL MODEL
DFP14
DFP16
TECHNICAL SPECIFICATIONS
PARAMETER
Isolation Resistance 11 Schematic
Voltage Coefficient of Resistance:
UNIT
MW
ppm/V
Maximum Operating Voltage:
VDC
Operating Temperature Range:
°C
Storage Temperature Range:
°C
11 Schematic
DFP14 / 16
> 100
< 50 typical
75
- 55 to + 125
- 55 to + 150
Package
0.65
0.50
0.250 [6.35]
Min.
0.250 [6.35]
Min.
0.065
[1.65]
Max.
0.825 [20.96]
Max.
DIMENSION A
0.037 ± 0.010 [0.94 ± 0.25]
0.012 ± 0.010 [0.30 ± 0.25]
0.005 + 0.004
- 0.002
[0.127 + 0.102
- 0.051]
MECHANICAL SPECIFICATIONS
Marking:
Model number, schematic number, value
tolerance, pin 1 indicator, date code.
Marking Resistance Permanency testing per MIL-STD-202
to Solvents:
Method 215.
Solderability:
Terminals:
Body:
Per MIL-STD-202, Method 208E.
Per MIL-STD-1276 DFPxx11, DFPxx12 =
Type G (hot solder dipped). Hot solder
dipped leads supplied as standard finish.
Epoxy filled ceramic sandwich
12 Schematic
Package
0.65
0.50
Single Resistor
0.25
Single Resistor
0.15
- 55
Derating
+ 25
+ 70 + 125 + 150
Ambient Temperature ∞C
- 55
Derating
+ 25
+ 70 + 125 + 150
Ambient Temperature ∞C
PERFORMANCE
TEST
Power Conditioning
Thermal Shock
Short Time Overload
Low Temperature Operation
Moisture Resistance
Resistance to Soldering Heat
Shock
Vibration
Load Life
Terminal Strength
Insulation Resistance
Dielectric Withstanding Voltage
CONDITIONS
1.5 x rated power, applied 1.5 hours “ON” and 0.5 hour “OFF”
for 100 hours ± 4 hours at + 25°C ambient temperature
5 cycles between - 65°C and + 125°C
2.5 x rated working voltage, 5 seconds
45 minutes at full rated working voltage at - 65°C
240 hours with humidity ranging from 80% RH to 98% RH
Leads immersed in + 260°DC solder to within 1/16" of body for 10 seconds
Total of 18 shocks at 100 G's
12 hours at maximum of 20 G's between 10 and 2,000 Hz
1000 hours at + 70°C, rated power applied 1.5 hours “ON”, 0.5 hour “OFF”
for full 1000 hour period. Derated according to the curve.
1.5 pound pull for 30 seconds
10,000 Megohm (minimum)
No evidence of arcing or damage (200 V RMS for 1 minute)
MAX. DR (Typical Test Lots)
± 0.50% DR
± 0.50% DR
± 0.25% DR
± 0.25% DR
± 0.50% DR
± 0.25% DR
± 0.25% DR
± 0.25% DR
± 0.50% DR
± 0.25% DR
-
-
Document Number: 31513
Revision: 08-Sep-04
For technical questions contact: [e-mail]
www.vishay.com
41