|
DFP14 Datasheet, PDF (1/2 Pages) Vishay Siliconix – Thick Film Resistor Networks Flat Pack, 11, 12 Schematics | |||
|
DFP
Vishay Dale
Thick Film Resistor Networks
Flat Pack, 11, 12 Schematics
FEATURES
â 11 and 12 Schematics
â 0.065" [1.65mm] height for high density packaging
â Low temperature coefficient (- 55°C to + 125°C)
± 100ppm/°C
â Hot solder dipped leads
â Highly stable thick film
â Wide resistance range
â All devices are capable of passing the MIL-STD-202,
Method 210, Condition C "Resistance to Soldering Heat"
test
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING
GLOBAL
MODEL
P25°C
ELEMENT
W
P25°C
PACKAGE
W
CIRCUIT
SCHEMATIC
DFP
0.25
0.65
0.15
0.65
11
12
1)Temperature Range: - 55°C to + 125°C
⢠Consult factory for stocked values
LIMITING ELEMENT
VOLTAGE
MAX.
VÆ
TEMPERATURE1)
COEFFICIENT
ppm/°C
STANDARD2)
TOLERANCE
%
RESISTANCE
RANGE
W
75
± 100
2
10 - 1M
75
± 100
2
10 - 1M
2) ± 1% and ± 5% tolerance available
TEMPERATURE
COEFFICIENT
TRACKING
ppm/°C
50
50
TECHNICAL SPECIFICATIONS
11 Schematic
12 Schematic
Pin #1
DFP1411
DFP1611
⢠⢠â¢â¢ â¢â¢â¢ â¢
Pin #1
DFP1412
DFP1612
7 or 8 isolated resistors
The DFPxx11 provides the user with 7 or 8 nominally equal resistors with
each resistor isolated from all others. Commonly used in the following
applications:
⢠"Wired OR" Pull-up
⢠Long-line Impedance Balancing
⢠Power Driven Pull-up
⢠LED Current Limiting
⢠Power Gate Pull-up
⢠ECL Output Pull-down
⢠Line Termination
⢠TTL Input Pull-down
13 or 15 resistors with one pin common
The DFPxx12 provides the user with a choice of 13 or 15 nominally equal
resistors, each connected to a common pin (14 or 16). Commonly used in
the following applications:
⢠MOS/ROM Pull-up/Pull-down ⢠TTL Input Pull-down
⢠Open Collector Pull-up
⢠Digital Pulse Squaring
⢠"Wired OR" Pull-up
⢠TTL Unused Gate Pull-up
⢠Power Driven Pull-up
⢠High Speed Parallel Pull-up
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: DFP14121K00GD05 (preferred part numbering format)
D F P1 4 1 2 1 K 0 0 GD 0 5
GLOBAL MODEL PIN COUNT SCHEMATIC
DFP
14
11 = Isolated
16
12 = Bussed
RESISTANCE
VALUE
R = Decimal
K = Thousand
M = Million
10R0 = 10W
680K = 680KW
1M00 = 1.0MW
TOLERANCE
CODE
F = ± 1%
G = ± 2%
J = ± 5%
Historical Part Number example: DFP1412102G (will continue to be accepted)
DFP
14
12
102
PACKAGING
E05 = Lead Free, Tube
D05 = Tin/Lead, Tube
G
SPECIAL
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1-999
as applicable
D05
HISTORICAL MODEL
PIN COUNT
SCHEMATIC
RESISTANCE VALUE TOLERANCE CODE
PACKAGING
www.vishay.com
40
For technical questions contact: ff2aresistors@vishay.com
Document Number: 31513
Revision: 08-Sep-04
|
▷ |