CHPHT Datasheet, PDF (2/6 Pages) Vishay Siliconix – High Temperature (245 °C) Thick Film Chip Resistor

www.vishay.com
CHPHT
Vishay Sfernice
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
RESISTANCE
RANGE

RATED
POWER
Pn
W
(at 230 °C)
CHPHT
0603
0.1 to 25M
0.0125
CHPHT
0805
0.1 to 25M
0.02
CHPHT
1206
0.1 to 50M
0.025
CHPHT
2010
0.1 to 100M
0.1
CLIMATIC SPECIFICATIONS
Operating temperature range
-55 °C to +230 °C
Storage temperature range
-55 °C to +245 °C
LIMITING
ELEMENT
VOLTAGE
V
MAX.
OVERLOAD
VOLTAGE
V
TOLERANCE
±%
TEMPERATURE
COEFFICIENT
± ppm/°C
50
100
1, 2, 5
100, 200
150
300
1, 2, 5
100, 200
200
400
1, 2, 5
100, 200
200
400
1, 2, 5
100, 200
PACKAGING
ESD packaging available: Waffle pack and plastic tape and
reel (low conductivity). Paper tapes available on request
(ESD only). (For 0603, 0805, and 1206 only.)
MECHANICAL SPECIFICATIONS
Substrate
Alumina
Technology
Thick film (Ruthenium oxyde)
Protection
Parts have double and
organic coating
(0R5 to 100M)
Terminations
N (W/A): SnAg over nickel
barrier for temperature
up to 200 °C
G (W/A) type: Gold (< 1 μm) over
nickel barrier for temperature
up to 245 °C
Note
• Refer to Application Note “Guidelines for Vishay Sfernice
Resistive and Inductive Components” (document number:
52029) for recommended reflow profile. Profile #3 applies.
BEST TOL. AND TCR VERSUS OHMIC VALUE
TIGHTEST
TOLERANCE
OHMIC
VALUES
BEST TCR
ppm/°C
1 % (F)
5  < R < 10M
100 (K)
2 % (G)
1  < R < R max.
200 (L)
5 % (J)
0.1  < R < R max.
200 (L)
POWER DERATING CURVE
1200
1000
800
600
SIZE
0603
0805
1206
2010
NUMBER OF PIECESPER PACKAGE
WAFFLE
PACK
TAPE AND REEL
MIN.
MAX.
5000
100
100
4000
140
60
2000
TAPE
WIDTH
8 mm
PACKAGING RULES
Waffle Pack
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the
top of each other and closed by one single cover.
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay Sfernice for specific ordering
code
Tape and Reel
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered is between the MOQ and the
maximum reel capacity, only one reel is provided.
When several reels are needed for ordered quantity
within MOQ and maximum reel capacity: Please consult
Vishay Sfernice for specific ordering code
400
200
0
0
50
100
150
200
250
300
Ambient Temperature in °C
Revision: 21-Jul-14
2
Document Number: 52032
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000