TH4 Datasheet, PDF (13/15 Pages) Vishay Siliconix – Operating temperature up to 175°C with 50% voltage derating

www.vishay.com
Typical Performance Characteristics
Vishay Sprague
CATEGORY VOLTAGE VS. TEMPERATURE
1.0
0.8
0.6
0.4
0.2
Voltage-Temperature Derating Coefficient
0
-55
0
25 85 125 150 175
Temperature (°C)
Note
• Below 85 °C category voltage is equal to rated voltage.
TYPICAL LEAKAGE CURRENT FACTOR
100
+175 °C
+150 °C
10
+125 °C
+85 °C
+55 °C
1
+25 °C
0 °C
0.1
- 55 °C
0.01
0.001
0 10 20 30 40 50 60 70 80 90 100
Percent of Rated Voltage
Note
• At +25 °C, the leakage current shall not exceed the value listed in the Standard Ratings table.
At +85 °C, the leakage current shall not exceed 10 times the value listed in the Standard Ratings table.
At +125 °C, the leakage current shall not exceed 12 times the value listed in the Standard Ratings table.
At +150 °C, the leakage current shall not exceed 15 times the value listed in the Standard Ratings table.
At +175 °C, the leakage current shall not exceed 18 times the value listed in the Standard Ratings table.
Revision: 11-May-15
2
Document Number: 40215
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000