TNPW Datasheet, PDF (1/8 Pages) Vishay Siliconix – Thin Film, Rectangular, Resistor Chips

www.vishay.com
TNPW
Vishay
Lead (Pb)-Bearing High Stability Thin Film Chip Resistors
TNPW High Stability Thin Film Chip Resistors are the perfect
choice for most fields of modern electronics where lead
(Pb)-bearing terminations are mandatory and reliability and
stability are of major concern.
FEATURES
• Metal film layer on high quality ceramic
• SnPb termination plating, Pb content > 6 %
• Excellent overall stability at different environmental
conditions  0.05 % (1000 h rated power at 70 °C)
• Low temperature coefficient and tight tolerances (± 0.1 %;
± 10 ppm/K)
• Single lot date code available
APPLICATIONS
• Military
• Avionics
• Industrial
TECHNICAL SPECIFICATIONS
DESCRIPTION
TNPW0402
TNPW0603
TNPW0805
TNPW1206
TNPW1210 ⁽¹⁾
Imperial size
0402
0603
0805
1206
1210
Metric size code
RR1005M
RR1608M
RR2012M
RR3216M
RR3225M
Resistance range
10  to 100 k 10  to 332 k 10  to 1 M
10  to 2 M 10  to 3.01 M
Resistance tolerance
± 1 %; ± 0.5 %; ± 0.1 %
Temperature coefficient
± 50 ppm/K; ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K
Climatic category (LCT/UCT/days)
55/125/56
55/125/56
55/125/56
55/125/56
55/125/56
Rated dissipation, P₇₀ ⁽²⁾
Operating voltage, U_max. AC_RMS or DC
Permissible film temperature, _{F max.}
Operating Temperature Range
0.063 W
50 V
0.1 W
75 V
0.125 W
150 V
155 °C
-55 °C to 125 °C (155 °C)
0.25 W
200 V
0.33 W
200 V
Thermal resistance ⁽³⁾
870 K/W
550 K/W
440 K/W
220 K/W
170 K/W
Insulation voltage:
U_ins 1 min
Continuous
75 V
75 V
100 V
75 V
200 V
75 V
300 V
75 V
300 V
75 V
Failure rate: FIT_observed
 0.3 x 10^-9/h
Notes
(1) _{The detail specification EN140401-801 does not cover this product size.}
(2) _{Rated voltage P x R . The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat}
flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not
exceeded.
(3) _{Measuring conditions in accordance with EN 140401-801.}
Revision: 24-Jan-14
1
Document Number: 31006
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000