SIA913ADJ Datasheet, PDF (1/9 Pages) Vishay Siliconix – Dual P-Channel 12-V (D-S) MOSFET

New Product
Dual P-Channel 12-V (D-S) MOSFET
SiA913ADJ
Vishay Siliconix
PRODUCT SUMMARY
V_DS (V)
R_DS(on) (Ω)
0.061 at V_GS = - 4.5 V
- 12
0.081 at V_GS = - 2.5 V
0.115 at V_GS = - 1.8 V
I_D (A)
- 4.5^a
- 4.5^a
- 4.5^a
Q_g (Typ.)
8.2 nC
FEATURES
• Halogen-free According to IEC 61249-2-21
• TrenchFET^® Power MOSFET
• New Thermally Enhanced PowerPAK^®
SC-70 Package
- Small Footprint Area
- Low On-Resistance
PowerPAK SC-70-6 Dual
APPLICATIONS
• Load Switch, PA Switch and Battery Switch for Portable
Devices
S₁
S₂
1
S₁
2
G₁
D₁
3
D2
D1
6
D₂
G2
5
2.05 mm S₂
4
2.05 mm
Marking Code
Part # code
DIX
XXX
Lot Traceability
and Date code
G₁
G₂
D₁
D₂
Ordering Information: SiA913ADJ-T1-GE3 (Lead (Pb)-free and Halogen-free) P-Channel MOSFET P-Channel MOSFET
ABSOLUTE MAXIMUM RATINGS T_A = 25 °C, unless otherwise noted
Parameter
Symbol
Limit
Unit
Drain-Source Voltage
Gate-Source Voltage
V_DS
- 12
V
V_GS
±8
T_C = 25 °C
- 4.5^a
Continuous Drain Current (T_J = 150 °C)
T_C = 70 °C
T_A = 25 °C
I_D
- 4.5^a
- 4.3^{b, c}
T_A = 70 °C
- 3.8^{b, c}
A
Pulsed Drain Current
I_DM
- 15
Continuous Source-Drain Diode Current
T_C = 25 °C
T_A = 25 °C
I_S
- 4.5^a
- 1.6^{b, c}
T_C = 25 °C
6.5
Maximum Power Dissipation
T_C = 70 °C
T_A = 25 °C
P_D
5
1.9^{b, c}
W
T_A = 70 °C
1.2^{b, c}
Operating Junction and Storage Temperature Range
Soldering Recommendations (Peak Temperature)^{d, e}
T_J, T_stg
- 55 to 150
°C
260
THERMAL RESISTANCE RATINGS
Parameter
Symbol
Typical
Maximum
Unit
Maximum Junction-to-Ambient^{b, f}
Maximum Junction-to-Case (Drain)
t≤5s
R_thJA
52
65
°C/W
Steady State
R_thJC
12.5
16
Notes:
a. Package limited.
b. Surface Mounted on 1" x 1" FR4 board.
c. t = 5 s.
d. See Solder Profile (www.vishay.com/ppg?73257). The PowerPAK SC-70 is a leadless package. The end of the lead terminal is exposed
copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and
is not required to ensure adequate bottom side solder interconnection.
e. Rework Conditions: manual soldering with a soldering iron is not recommended for leadless components.
f. Maximum under Steady State conditions is 110 °C/W.
Document Number: 64723
S09-0141-Rev. A, 02-Feb-09
www.vishay.com
1