SIA511DJ Datasheet, PDF (1/6 Pages) Vishay Siliconix – N- and P-Channel 12-V (D-S) MOSFET

SPICE Device Model SiA511DJ
Vishay Siliconix
N- and P-Channel 12-V (D-S) MOSFET
CHARACTERISTICS
• N- and P-Channel Vertical DMOS
• Macro Model (Subcircuit Model)
• Level 3 MOS
• Apply for both Linear and Switching Application
• Accurate over the −55 to 125°C Temperature Range
• Model the Gate Charge, Transient, and Diode Reverse Recovery
Characteristics
DESCRIPTION
The attached spice model describes the typical electrical
characteristics of the n- and p-channel vertical DMOS. The
subcircuit model is extracted and optimized over the
−55 to 125°C temperature ranges under the pulsed 0-V to 4.5-V
gate drive. The saturated output impedance is best fit at the gate
bias near the threshold voltage.
A novel gate-to-drain feedback capacitance network is used to model
the gate charge characteristics while avoiding convergence difficulties
of the switched C_gd model. All model parameter values are optimized
to provide a best fit to the measured electrical data and are not
intended as an exact physical interpretation of the device.
SUBCIRCUIT MODEL SCHEMATIC
This document is intended as a SPICE modeling guideline and does not constitute a commercial product data sheet. Designers should refer to the appropriate
data sheet of the same number for guaranteed specification limits.
Document Number: 69663
S-72405Rev. A, 19-Nov-07
www.vishay.com
1