RV Datasheet, PDF (1/5 Pages) Vishay Siliconix – CECC ( ) 40401-010 Qualified Thin Film Chip Resistors

www.vishay.com
RV
Vishay Sfernice
CECC ( ) 40401-010 Qualified Thin Film Chip Resistors
Utilizing proven expertise in Thin Film resistors, VISHAY
provides a CECC qualified chip with the same reliability
and stability found in QPL resistors. These chips are
available in a wide range of sizes, values and performance
characteristics.
CONSTRUCTION
Passivated NiCr
Passivation resistance film
Solder
coating
Nickel barrier
High purity
alumina substrate
Adhesion layer
FEATURES
• Nickel barrier for high temperature operating
conditions
• Tight TCR < 10 ppm/°C, and in lot tracking
< 5 ppm/°C in (-55 °C, +155 °C temperature
range)
Available
Available
• Very low noise < 35 dB and voltage coefficient
0.1 ppm/V
• Non-inductive
• Laser trimmed down to 0.1 %
• Wraparound resistance less than 0.01 
• Antistatic waffle-pack or tape and reel packaging
available
• High stability (0.05 % - 1000 h at Pn at +70 °C)
• Withstand moisture resistance test of AEC-Q200
• Conform to EN 140401 804
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
RESISTANCE
RANGE ^{(1) (2)}

RATED POWER
Pn
W
RV
0505
100 to 260K
RV
0603
100 to 260K
RV
0805
100 to 300K
RV
1206
100 to 1M
Notes
(1) _{Extended resistance range on request}
(2) _{For ohmic range versus tolerance and TCR, see detailed table}
0.125
0.125
0.200
0.330
LIMITING
ELEMENT
VOLTAGE (UL)
V
50
50
50
75
TOLERANCE
±%
0.1, 0.5, 1, 2, 5
0.1, 0.5, 1, 2, 5
0.1, 0.5, 1, 2, 5
0.1, 0.5, 1, 2, 5
TEMPERATURE
COEFFICIENT
± ppm/°C
10, 25
10, 25
10, 25
10, 25
CLIMATIC SPECIFICATIONS
Operating temperature range
Storage temperature range
-55 °C to +155 °C
-55 °C to +155 °C
MECHANICAL SPECIFICATIONS
Resistive material
Nichrome
Substrate material
Alumina
Plating
Tin lead over nickel or tin silver
over nickel or gold over nickel
Marking resistance to solvents
Per CECC Specs
OHMIC RANGE VS. TOLERANCE AND TCR
CASE SIZE
0505
0505
0603
0603
0805
OHMIC RANGE

100 < 500
500 to 260K
100 < 500
500 to 260K
100 < 500
TOLERANCE
%
0.5; 1; 2; 5
0.1; 0.5; 1; 2; 5
0.5; 1; 2; 5
0.1; 0.5; 1; 2; 5
0.5; 1; 2; 5
TCR
ppm/°C
10, 25
10, 25
10, 25
10, 25
10, 25
0805
1206
1206
500 to 300K
100 < 500
500 to 1M
0.1; 0.5; 1; 2; 5
0.5; 1; 2; 5
0.1; 0.5; 1; 2; 5
10, 25
10, 25
10, 25
TECHNICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Absolute TCR
Absolute tolerance
E: ± 25 ppm/°C
Y: ± 10 ppm/°C
± 0.1 %, ± 0.5 %, ± 1 %, ± 2 %, ± 5 % (R  500 )
± 0.5 %, ± 1 %, ± 2 %, ± 5 % (R  100 )
Voltage coefficient
0.1 ppm/V
Noise
-35 dB typical
Thermal EMF
Load life stability
< 0.1 μV/°C
± (0.1 % Rn ⁽³⁾ ± 0.05 )
Note
(3) _{Rn: Nominal resistance}
CONDITIONS
-55 °C to +155 °C
1000 h Pn at +70 °C
Revision: 21-Jun-14
1
Document Number: 60022
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000