MBRF1090CT Datasheet, PDF (1/4 Pages) GOOD-ARK Electronics – Dual High-Voltage Schottky Barrier Rectifiers

MBRF1090CT & MBRF10100CT
Vishay General Semiconductor
Dual Common-Cathode High-Voltage Schottky Rectifier
ITO-220AB
PIN 1
PIN 3
123
PIN 2
PRIMARY CHARACTERISTICS
I_F(AV)
V_RRM
I_FSM
V_F
T_J max.
5.0 A x 2
90 V, 100 V
120 A
0.75 V
150 °C
FEATURES
• Guardring for overvoltage protection
• Lower power losses, high efficiency
• Low forward voltage drop
• High forward surge capability
• High frequency operation
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in high frequency rectifier of switching mode
power supplies, freewheeling diodes, dc-to-dc
converters or polarity protection application.
MECHANICAL DATA
Case: ITO-220AB
Epoxy meets UL 94V-0 flammability rating
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix for consumer grade, meets JESD 201 class
1A whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (T_C = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum repetitive peak reverse voltage
Working peak reverse voltage
Maximum DC blocking voltage
Maximum average forward rectified current at T_C = 105 °C
total device
per diode
V_RRM
V_RWM
V_DC
I_F(AV)
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load per diode
I_FSM
Peak repetitive reverse current per diode at t_p = 2 µs, 1 kHz
Voltage rate of change (rated V_R)
Operating junction and storage temperature range
Isolation voltage
from terminal to heatsink with t = 1 min
I_RRM
dV/dt
T_J, T_STG
V_AC
MBRF1090CT MBRF10100CT
90
100
90
100
90
100
10
5.0
120
0.5
10 000
- 65 to + 150
1500
UNIT
V
V
V
A
A
A
V/µs
°C
V
ELECTRICAL CHARACTERISTICS (T_C = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL MBRF1090CT MBRF10100CT
Maximum instantaneous forward voltage I_F = 5.0 A
per diode ⁽¹⁾
I_F = 5.0 A
T_C = 125 °C
T_C = 25 °C
V_F
Maximum reverse current per diode at
working peak reverse voltage ⁽¹⁾
T_J = 25 °C
T_J = 100 °C
I_R
Note:
0.75
0.85
100
6.0
(1) Pulse test: 300 µs pulse width, 1 % duty cycle
UNIT
V
µA
mA
Document Number: 88681 For technical questions within your region, please contact one of the following:
Revision: 08-Nov-07
[e-mail], [e-mail], [e-mail]
www.vishay.com
1