MBR30H35CT_15 Datasheet, PDF (1/6 Pages) Vishay Siliconix – Dual Common Cathode Schottky Rectifier

MBR30HxxCT, MBRF30HxxCT, MBRB30HxxCT
www.vishay.com
Vishay General Semiconductor
Dual Common Cathode Schottky Rectifier
High Barrier Technology for Improved High Temperature Performance
TO-220AB
ITO-220AB
MBR30HxxCT
PIN 1
PIN 2
PIN 3
CASE
3
2
1
TO-263AB
K
123
MBRF30HxxCT
PIN 1
PIN 2
PIN 3
2
1
MBRB30HxxCT
PIN 1
K
PIN 2
HEATSINK
FEATURES
• Power pack
• Guardring for overvoltage protection
• Lower power losses, high efficiency
• Low forward voltage drop
• Low leakage current
• High forward surge capability
• High frequency operation
• Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for TO-263AB package)
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for TO-220AB and ITO-220AB package)
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in low voltage, high frequency rectifier of switching
mode power supplies, freewheeling diodes, DC/DC
converters, or polarity protection application.
PRIMARY CHARACTERISTICS
I_F(AV)
V_RRM
I_FSM
V_F
I_R
T_J max.
Package
2 x 15 A
35 V, 45 V, 50 V, 60 V
150 A
0.56 V, 0.59 V
80 μA, 60 μA
175 °C
TO-220AB, ITO-220AB,
TO-263AB
Diode variations
Dual Common Cathode
MECHANICAL DATA
Case: TO-220AB, ITO-220AB, TO-263AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (T_A = 25 °C unless otherwise noted)
PARAMETER
SYMBOL MBR30H35CT MBR30H45CT MBR30H50CT MBR30H60CT
Maximum repetitive peak reverse voltage
V_RRM
35
45
50
60
Working peak reverse voltage
V_RWM
35
45
50
60
Maximum DC blocking voltage
V_DC
35
45
50
60
Maximum average forward rectified ^{total device}
current (fig. 1)
per diode
I_F(AV)
30
15
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load per diode
I_FSM
150
Peak repetitive reverse surge current per diode 
at t_p = 2 μs, 1 kHz
I_RRM
1.0
0.5
Peak non-repetitive reverse energy 
(8/20 μs waveform)
E_RSM
25
20
UNIT
V
V
V
A
A
A
mJ
Revision: 13-Aug-13
1
Document Number: 88866
For technical questions within your region: [e-mail], [e-mail], [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000