DG411L Datasheet, PDF (1/9 Pages) Vishay Siliconix – Precision Monolithic Quad SPST Low-Voltage CMOS Analog Switches

DG411L/412L/413L
Vishay Siliconix
Precision Monolithic Quad SPST
Low-Voltage CMOS Analog Switches
FEATURES
D 2.7- thru 12-V Single Supply or
"3- thru "6-Dual Supply
D On-Resistance—r_DS(on): 17 W
D Fast Switching—t_ON: 19 ns
—t_OFF: 12 ns
D TTL, CMOS Compatible
D Low Leakage: 0.25 nA
D 2000-V ESD Protection
BENEFITS
APPLICATIONS
D Widest Dynamic Range
D Low Signal Errors and Distortion
D Break-Before-Make Switching Action
D Simple Interfacing
D Precision Automatic Test Equipment
D Precision Data Acquisition
D Communication Systems
D Battery Powered Systems
D Computer Peripherals
D SDSL, DSLAM
D Audio and Video Signal Routing
DESCRIPTION
The DG411L/412L/413L are low voltage pin-for-pin
compatible companion devices to the industry standard
DG411/412/413 with improved performance
Using BiCMOS wafer fabrication technology allows the
DG411L/412L/413L to operate on single and dual supplies.
Single supply voltage ranges from 3 to 12 V while dual supply
operation is recommended with "3 to "6 V.
Combining high speed (t_ON: 19 ns), flat r_DS(on) over the analog
signal range (5 W), minimal insertion lose (-3 dB at 280 MHz),
and excellent crosstalk and off-isolation performance (-50 dB
at 50 MHz), the DG411L/412L/413L are ideally suited for audio
and video signal switching.
The DG411L and DG412L respond to opposite control logic as
shown in the Truth Table. The DG413L has two normally open
and two normally closed switches.
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG411L/412L
TSSOP and SOIC
IN₁ 1
D₁ 2
S_{1 3}
V- 4
GND 5
S₄ 6
D₄ 7
IN₄ 8
Top View
16 IN2
15 D2
14 S2
13 V+
12 V_L
11 S3
10 D₃
9 IN₃
Document Number: 71397
S-21452—Rev. C, 26-Aug-02
TRUTH TABLE
Logic
DG411L DG412L
0
ON
OFF
1
OFF
ON
Logic “0” v 0.8 V
Logic “1” w 2.4 V
www.vishay.com
1