DG3516_11 Datasheet, PDF (1/10 Pages) Vishay Siliconix – 300 MHz, 2.5ohm, Dual SPDT Analog Switches

DG3516, DG3517
Vishay Siliconix
300 MHz, 2.5 , Dual SPDT Analog Switches
DESCRIPTION
The DG3516, DG3517 are dual SPDT analog switches which
operate from 1.8 V to 5.5 V single rail power supply. They are
design for audio, video, and USB switching applications.
The devices have 2.5  on-resistance and 300 MHz 3dB
bandwidth. 0.2  on-resistance matching and 1  flatness
make the device high linearity. The devices are 1.6 V logic
compatible within the full operation voltage range.
These switches are built on a sub-micron high density
process that brings low power consumption and low voltage
performance.
The switches are packaged in MICRO FOOT chip scale
package of 4 mm x 3 mm bump array.
As a committed partner to the community and environment,
Vishay Siliconix manufactures this product with the
lead (Pb)-free device terminations. For MICRO FOOT analog
switch products manufactured with tin/silver/copper
(SnAgCu) device termination, the lead (Pb)-free “-E1” suffix
is being used as a designator.
FEATURES
• Halogen-free according to IEC 61249-2-21
Definition
• 1.8 V to 5.5 V operation
• 2.5  at 2.7 V R_ON
• 300 MHz - 3 dB bandwidth
• ESD method 3015.7 > 2 kV
• Latch-up current 200 mA (JESD 78)
• 1.6 V logic compatible
• Compliant to RoHS Directive 2002/95/EC
BENEFITS
• Space Saving MICRO FOOT^® Package
• High Linearity
• Low Power Consumption
• High Bandwidth
• Full Rail Signal Swing Range
APPLICATIONS
• Cellular Phones
• MP3
• Media Players
• Modems
• Hard Drives
• PCMCIA
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG3516/DG3517
MICRO FOOT 10-Bump
V+
A
IN₁
NO₁
NC₁
NO₂
NC₂
IN₂
B
COM₁
C
COM₂
1
2
3
4
NC₂ IN₂ COM₂ NO₂
GND ^DG3516
V+
Top View
NC₁ IN₁ COM₁ NO₁
TRUTH TABLE
Logic
NC1 and NC2
0
ON
1
OFF
NO1 and NO2
OFF
ON
GND
1
2
3
4
Device Marking
A
A1 Locator
B
XXX
3516
C
3516 = Example Base Part Number
xxx = Data/Lot Traceabiliity Code
NO₂ IN₂ COM₂ NC₂
GND
DG3517
Top View
V+
NO₁ IN₁ COM₁ NC₁
ORDERING INFORMATION
Temp. Range
Package
MICRO FOOT: 10 Bump
- 40 °C to 85 °C (4 x 3, 0.5 mm Pitch,
238 µm Bump Height)
Part Number
DG3516DB-T5-E1
DG3517DB-T5-E1
Document Number: 73404
www.vishay.com
S11-1185-Rev. D, 13-Jun-11
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000