DG2612 Datasheet, PDF (1/7 Pages) Vishay Siliconix – Low-Voltage, Low rON, SPDT Audio Switch with Negative Swing Capability

DG2612/2613
Vishay Siliconix
Low-Voltage, Low r_ON, SPDT Audio Switch
with Negative Swing Capability
DESCRIPTION
The DG2612/2613 is a low on-resistance, single-pole/
double-throw monolithic CMOS analog switch with
negative signal swing capability. It is designed for low
voltage applications. The DG2612/2613 is ideal for
portable and battery powered equipment, requiring
high performance and efficient use of board space. In
additional to the low on-resistance (1.0 Ω at 2.7 V), the
DG2613 has a typical OFF Isolation and Crosstalk of
- 67 dB and - 73 dB respectively.
The DG2612/2613 is built on Vishay Siliconix’s low
voltage process.
Break-before-make is guaranteed.
As a committed partner to the community and the envi-
ronment, Vishay Siliconix manufactures this product
with the lead (Pb)-free device terminations. For analog
switching products manufactured with 100 % matte tin
device terminations, the lead (Pb)-free “-E3” suffix is
being used as a designator.
FEATURES
• Low Voltage Operation (1.8 V to 5.5 V)
• Low On-Resistance - r_ON: 1.0 Ω at 2.7 V
• High Bandwidth
BENEFITS
• Negative Signal Swing Capability
• Shunt Switch to Eliminate Switching Noise
• Simplified Design with Direct DC Coupling
• Space Saving SC-89 Package
APPLICATIONS
• Cellular Phones
• Portable Multimedia Players
• PDAs and Hand-held Devices
• Laptop Computers
RoHS
COMPLIANT
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG2612
IN 1
V+ ²
GND 3
6 NO (Source₁)
5 COM
4 NC (Source₂)
Ax
Top View
Device Marking: Dx
Pin 1
DG2613
x = Date/Lot Traceability Code
IN 1
V+ ²
GND 3
6 NO (Source₁)
5 COM
4 NC (Source₂)
TRUTH TABLE
Logic
NC
NO
0
ON
OFF
1
OFF
ON
COMMERCIAL ORDERING INFORMATION
Temp Range
Package
Part Number
- 40 to 85 °C
SC-89 (SOT-666)
Lead (Pb)-free
with Tape and Reel
DG2612DX-T1-E3
DG2613DX-T1-E3
Top View
Device Marking: Ex
ABSOLUTE MAXIMUM RATINGS T_A = 25 °C, unless otherwise noted
Parameter
Symbol
Limit
Unit
Reference V+ to GND
IN, COM, NC, NO^a
- 0.3 to + 6
V
- 0.3 to (V+ + 0.3 V)
Continuous Current (NO, NC, COM pins)
Peak Current (Pulsed at 1 ms, 10 % duty cycle)
± 150
mA
± 300
Storage Temperature
Power Dissipation (Packages)^b
D Suffix
SC-89^c
- 65 to 150
°C
172
mW
Notes:
a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads welded or soldered to PC Board.
c. Derate 2.15 mW/°C above 70 °C.
Document Number: 74339
S-61509-Rev. A, 28-Aug-06
www.vishay.com
1