DG2511_11 Datasheet, PDF (1/9 Pages) Vishay Siliconix – Low-Voltage, Low RON, Single Analog Switch In miniQFN-6 Package

DG2511, DG2512, DG2513
Vishay Siliconix
Low-Voltage, Low R_ON, Single Analog Switch
In miniQFN-6 Package
DESCRIPTION
The DG2511, DG2512, DG2513 are low on-resistance,
single-pole/double-throw or single-pole/single-throw
monolithic CMOS analog switch. It is designed for low
voltage applications. The DG2511, DG2512, DG2513 are
ideal for portable and battery powered equipment, requiring
high performance and efficient use of board space. In
additional to the low on-resistance (1.3  at 2.7 V).
The DG2511 is an SPDT and the DG2512, DG2513 are
SPST. The switch conducts equally well in both directions
when on, and blocks up to the power supply level when off.
The DG2511, DG2512, DG2513 are built on Vishay
Siliconix’s low voltage JI5L process. An epitaxial layer
prevents latchup.
Break-before-make is guaranteed.
The DG2511, DG2512, DG2513 represents a breakthrough
in packaging development for analog switching products.
The miniQFN-6 package (1.2 x 1.0 mm).
As a committed partner to the community and the
environment, Vishay Siliconix manufactures this product with
the lead (Pb)-free device terminations. For analog switching
products manufactured with NiPdAu device terminations, the
lead (Pb)-free "-E4" suffix is being used as a designator.
FEATURES
• Low voltage operation (1.8 V to 5.5 V)
• Low on-resistance - R_ON: 1.3  at 2.7 V
• Low charge injection
• Latch-up current > 300 mA (JESD78A)
• miniQFN-6 package (1.2 x 1.0 mm)
• Compliant to RoHS Directive 2002/95/EC
BENEFITS
• Reduced power consumption
• Simple logic interface
• High accuracy
• Reduce board space
• Guaranteed 2 V operation
APPLICATIONS
• Cellular phones
• Communication systems
• Portable test equipment
• Battery operated systems
• Sample and hold circuits
• ADC and DAC applications
• Low voltage data acquisition systems
RoHS
COMPLIANT
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
DG2511
miniQFN-6
DG2512
miniQFN-6
DG2513
miniQFN-6
NO 1
GND 2
6 IN
5 V+
NC 1
GND 2
6 IN
5 V+
NO 1
GND 2
6 IN
5 V+
NC 3
4 COM
NC 3
4 COM
NO 3
4 COM
Top View
Top View
Top View
Ax
Pin 1
Device Marking: Ax for DG2511
Bx for DG2512
Cx for DG2513
x = Date/Lot Traceability Code
Note: Pin 1 has long lead
TRUTH TABLE
Logic
NC
NO
0
On
Off
1
Off
On
COMMERCIAL ORDERING INFORMATION
Temp Range
Package
Part Number
- 40 °C to 85 °C
miniQFN-6
Lead (Pb)-free
with Tape and Reel
DG2511DN-T1-E4
DG2512DN-T1-E4
DG2513DN-T1-E4
Document Number: 74454
www.vishay.com
S11-0984–Rev. C, 23-May-11
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000