DFP14121K00GD05 Datasheet, PDF (1/3 Pages) Vishay Siliconix – Thick Film Resistor Networks Flat Pack, 11, 12 Schematics

DFP
Vishay Dale
Thick Film Resistor Networks
Flat Pack, 11, 12 Schematics
FEATURES
• 11 and 12 Schematics
• 0.065" [1.65 mm] height for high density packaging
• Low temperature coefficient (- 55 °C to + 125 °C)
± 100 ppm/°C
• Hot solder dipped leads
• Highly stable thick film
• Wide resistance range
• All devices are capable of passing the MIL-STD-202,
Method 210, Condition C "Resistance to Soldering Heat"
test
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
POWER RATING
P_{25 °C}
P_{25 °C}
ELEMENT PACKAGE
W
W
CIRCUIT
SCHEMATIC
LIMITING ELEMENT
VOLTAGE
MAX.
V≅
DFP
0.25
0.65
0.15
0.65
11
12
75
75
Notes
1. Temperature Range: - 55 °C to + 125 °C
2. ± 1 % and ± 5 % tolerance available
TEMPERATURE¹⁾
COEFFICIENT
ppm/°C
STANDARD²⁾
TOLERANCE
%
RESISTANCE
RANGE
Ω
± 100
± 100
2
10 - 1M
2
10 - 1M
• Consult factory for stocked values
TEMPERATURE
COEFFICIENT
TRACKING
ppm/°C
50
50
TECHNICAL SPECIFICATIONS
11 Schematic
12 Schematic
Pin #1
DFP1411
DFP1611
• • •• ••• •
Pin #1
DFP1412
DFP1612
7 or 8 isolated resistors
The DFPxx11 provides the user with 7 or 8 nominally equal resistors with
each resistor isolated from all others. Commonly used in the following
applications:
• "Wired OR" Pull-up
• Long-line Impedance Balancing
• Power Driven Pull-up
• LED Current Limiting
• Power Gate Pull-up
• ECL Output Pull-down
• Line Termination
• TTL Input Pull-down
13 or 15 resistors with one pin common
The DFPxx12 provides the user with a choice of 13 or 15 nominally equal
resistors, each connected to a common pin (14 or 16). Commonly used in
the following applications:
• MOS/ROM Pull-up/Pull-down • TTL Input Pull-down
• Open Collector Pull-up
• Digital Pulse Squaring
• "Wired OR" Pull-up
• TTL Unused Gate Pull-up
• Power Driven Pull-up
• High Speed Parallel Pull-up
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: DFP14121K00GD05 (preferred part numbering format)
D F P1 4 1 2 1 K 0 0 GD 0 5
GLOBAL MODEL PIN COUNT
DFP
14
16
SCHEMATIC
11 = Isolated
12 = Bussed
RESISTANCE
VALUE
R = Decimal
K = Thousand
M = Million
10R0 = 10 Ω
680K = 680 kΩ
TOLERANCE
CODE
F=±1%
G=±2%
J=±5%
1M00 = 1.0 MΩ
Historical Part Number example: DFP1412102G (will continue to be accepted)
DFP
14
12
102
PACKAGING
E05 = Lead (Pb)-free, Tube
D05 = Tin/Lead, Tube
G
HISTORICAL MODEL
PIN COUNT
SCHEMATIC
RESISTANCE VALUE TOLERANCE CODE
SPECIAL
Blank = Standard
(Dash Number)
(up to 3 digits)
From 1-999
as applicable
D05
PACKAGING
www.vishay.com
328
For technical questions, contact: [e-mail]
Document Number: 31513
Revision: 08-Sep-04