CNY75GB Datasheet, PDF (1/12 Pages) Vishay Siliconix – Optocoupler with Phototransistor Output

CNY75(G) Series
Vishay Semiconductors
Optocoupler with Phototransistor Output
Description
The CNY75(G) series consists of a phototransistor
optically coupled to a gallium arsenide infrared-
emitting diode in a 6-lead plastic dual inline package.
The elements are mounted on one leadframe using
a coplanar technique, providing a fixed distance
between input and output for highest safety
requirements.
Applications
Circuits for safe protective separation against
electrical shock according to safety class II
(reinforced isolation):
D For appl. class I – IV at mains voltage ≤ 300 V
D For appl. class I – III at mains voltage ≤ 600 V
according to VDE 0884, table 2, suitable for:
Switch-mode power supplies, line receiver, com-
puter peripheral interface, microprocessor
system interface.
VDE Standards
These couplers perform safety functions according
to the following equipment standards:
D VDE 0884
Optocoupler for electrical safety requirements
D IEC 950/EN 60950
Office machines (applied for reinforced isolation
for mains voltage ≤ 400 V_RMS)
D VDE 0804
Telecommunication apparatus and data
processing
D IEC 65
Safety for mains-operated electronic and related
household apparatus
Order Instruction
Ordering Code
CTR Ranking
CNY75A/ CNY75GA¹⁾
63 to 125%
CNY75B/ CNY75GB¹⁾
100 to 200%
CNY75C/ CNY75GC¹⁾
160 to 320%
1) _{G = Leadform 10.16 mm; G is not marked on the body}
14827
BCE
6 54
123
A (+) C (–) n.c.
Remarks
Rev. A4, 11–Jan–99
1 (12)