591D Datasheet, PDF (1/10 Pages) Vishay Siliconix – Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Low ESR, Conformal Coated, Maximum CV

591D
Solid Tantalum Chip Capacitors
Vishay Sprague
TANTAMOUNT^®, Low Profile, Low ESR, Conformal Coated,
Maximum CV
PERFORMANCE CHARACTERISTICS
FEATURES
• New case size offerings.
• 1.2mm to 2mm height
• Terminations: Lead (Pb)-free (2) standard.
• Very low ESR
• 8mm, 12mm tape and reel packaging available per EIA-
481-1 and reeling per IEC 286-3. 7” [178mm] standard.
13” [330mm] available.
• Footprint compatible with EIA 535BAAC and
CECC 30801 molded chips.
Operating Temperature: - 55°C to + 85°C. (To + 125°C
with voltage derating.)
Capacitance Range: 1µF to 1000µF
Capacitance Tolerance: ±10%, ±20% standard.
Voltage Rating: 4WVDC to 10WVDC, (16WVDC,
20WVDC, and 25WVDC under development)
ORDERING INFORMATION
591D
477
X0
TYPE CAPACITANCE CAPACITANCE
TOLERANCE
6R3
W
2
DC VOLTAGE RATING CASE CODE TERMINATION
@ + 85°C
T
REEL SIZE AND
PACKAGING
This is expressed in
picofarads. The first
two digits are the
significant figures. The
third is the number of
zeros to follow.
X0 = ± 20%
X9 = ± 10%
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating. A decimal
point is indicated by an "R"
(6R3 = 6.3 volts).
See
Ratings
and Case
Codes
Table.
2 = 100% Tin.
T = Tape and Reel
7" [178mm] Reel
W = 13” [330mm]
Reel
Note: Preferred Tolerance and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage
substitutions will be marked with the higher voltage rating
DIMENSIONS in inches [millimeters]
W
Note: U, V and W are similar to C, D and R footprint (592D) with a 2mm height
Tantalum Wire
Nib Identifies
Anode (+)
Terminal
L
D
B
A
J
J
H
CASE CODE
L (MAX.)
W
H
A
A
0.147
0.072 ± 0.012
0.047 ± 0.012 0.031 ± 0.012
[3.7]
[1.8 ± 0.3]
[1.2 ± 0.3]
[0.80 ± 0.30]
B
0.159 0.110 + 0.012 - 0.016 0.047 ± 0.012 0.031 ± 0.012
[4.0]
[2.8 + 0.3 - 0.4]
[1.2 ± 0.3]
[0.80 ± 0.30]
C
0.282
0.126 ± 0.012
0.047 ± 0.012 0.051 ± 0.012
[7.1]
[3.2 ± 0.3]
[1.2 ± 0.3]
[1.3 ± 0.3]
D
0.298
0.170 ± 0.012
0.047 ± 0.012 0.051 ± 0.012
[7.5]
[4.3 ± 0.3]
[1.2 ± 0.3]
[1.3 ± 0.3]
R
0.286
0.235 ± 0.012
0.047 ± 0.012 0.051 ± 0.012
[7.2]
[6.0 ± 0.3]
[1.2 ± 0.3]
[1.3 ± 0.3]
U
0.282
0.126 ± 0.012
0.079
0.051 ± 0.012
[7.1]
[3.2 ± 0.3]
[2.0] Max.
[1.3 ± 0.3]
V
0.298
0.170 ± 0.012
0.079
0.051 ± 0.012
[7.5]
[4.3 ± 0.3]
[2.0] Max.
[1.3 ± 0.3]
W
0.286
0.235 ± 0.012
0.079
0.051 ± 0.012
[7.2]
[6.0 ± 0.3]
[2.0] Max.
[1.3 ± 0.3]
Note: The anode termination (D less B) will be a minimum of .012" [0.3mm].
B
0.085 ± 0.016
[2.2 ± 0.4]
0.097 ± 0.016
[2.5 ± 0.4]
0.180 ± 0.024
[4.6 ± 0.6]
0.180 ± 0.024
[4.6 ± 0.6]
0.180 ± 0.024
[4.6 ± 0.6]
0.180 ± 0.024
[4.6 ± 0.6]
0.180 ± 0.024
[4.6 ± 0.6]
0.180 ± 0.024
[4.6 ± 0.6]
Document Number 40012
Revision 22-Nov-04
For technical questions, contact [e-mail]
D (REF.)
0.115
[2.9]
0.127
[3.2]
0.238
[6.0]
0.254
[6.4]
0.246
[6.2]
0.238
[6.0]
0.254
[6.4]
0.246
[6.2]
J (MAX.)
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
0.004
[0.1]
www.vishay.com
89