V110A24C400BL Datasheet, PDF (11/13 Pages) Vicor Corporation – 110V Input Maxi Family DC-DC Converter Module Features

CONTROL FUNCTIONS - PR PIN (CONT.)
+OUT
+S
+S
Module 1 SC
–S
–S
–OUT
+OUT
+S
+S
Module 2 SC
–S
–S
–OUT
+OUT
+S
Module N+1 SC
–S
–OUT
+S
Load
–S
• The +Out and –Out power buses should be
designed to minimize and balance parasitic
impedance from each module output to the load.
• The +Sense pins should be tied to the same
point on the +Out power bus; the –Sense pins
should be tied to the same point on the –Out
power bus.
• At the discretion of the power system designer,
a subset of all modules within an array may be
configured as slaves by shorting SC to –S.
• ORʼing diodes may be inserted in series with
the +Out pins of each module to provide module
output fault tolerance.
+OUT
+S
SC
–S
–OUT
+Sense from
other modules
in the array
Figure 11 — N+1 module array output connections.
PIN STYLES*
Figure 12 — OR’ing diodes connections.
Designator
(None)
L
S
N
F
G
Description
Short Tin/Lead
Long Tin/Lead
Short ModuMate
Long ModuMate
Short RoHS
Long RoHS
Notes
Requires in-board, mounting
On-board mounting for 0.065" boards
SurfMate or in-board socket mounting
On-board socket mounting
Select for RoHS compliant in-board solder, socket, or SurfMate mounting
Select for RoHS compliant on-board solder or socket mounting
* Pin style designator follows the “B” after the output power and precedes the baseplate designator.
Ex. V110A12T400BN2 — Long ModuMate Pins
Vicor Corp. Tel: [phone] Fax: [phone]
110V Maxi Family
Set your site on VICOR at vicorpower.com
Rev. 2.1
Page 11 of 13