P024F048T12AL Datasheet, PDF (11/14 Pages) Vicor Corporation – PRM Regulator

Mechanical Drawings
V•I Chip Regulator
Figure 19 — PRM J-Lead mechanical outline; Onboard mounting
NOTES:
mm
1. DIMENSIONS ARE inch .
2. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE:
.X / [.XX] = +/-0.25 / [.01]; .XX / [.XXX] = +/-0.13 / [.005]
3. PRODUCT MARKING ON TOP SURFACE
DXF and PDF files are available on vicorpower.com
RECOMMENDED LAND PATTERN
( COMPONENT SIDE SHOWN )
NOTES:
mm
1. DIMENSIONS ARE inch .
2. UNLESS OTHERWISE SPECIFIED, TOLERANCES ARE:
.X / [.XX] = +/-0.25 / [.01]; .XX / [.XXX] = +/-0.13 / [.005]
3. PRODUCT MARKING ON TOP SURFACE
DXF and PDF files are available on vicorpower.com
Figure 20 — PRM J-Lead PCB land layout information; Onboard mounting
vicorpower.com 800-735-6200
V•I Chip Regulator
P024F048T12AL
Rev. 3.1
Page 11 of 14