English
Language : 

BCM380P475T1K2A30 Datasheet, PDF (10/25 Pages) Vicor Corporation – Fixed Ratio DC-DC Converter
BCM380x475y1K2A3z
Signal Characteristics
Specifications apply over all line, load conditions, unless otherwise noted; Boldface specifications apply over the temperature range of -40°C ≤ TINTERNAL
≤ 125°C (T-Grade); All other specifications are at TINTERNAL = 25ºC unless otherwise noted.
Temperature Monitor
• The TM pin is a standard analog I/O configured as an output from an internal µC.
• The TM pin monitors the internal temperature of the controller IC within an accuracy of ±5°C.
• µC 250 kHz PWM output internally pulled high to 3.3 V.
SIGNAL TYPE
STATE
Startup
ATTRIBUTE
SYMBOL
Powertrain active to TM
time
tTM
TM Duty Cycle
TMPWM
TM Current
ITM
Recommended External filtering
CONDITIONS / NOTES
MIN TYP MAX UNIT
100
µs
18.18
68.18 %
4 mA
DIGITAL
OUTPUT
Regular
Operation
TM Capacitance (External) CTM_EXT Recommended External filtering
TM Resistance (External)
RTM_EXT Recommended External filtering
Specifications using recommended filter
TM Gain
ATM
0.01
µF
1
kΩ
10
mV / °C
TM Voltage Reference
TM Voltage Ripple
VTM_AMB
VTM_PP
RTM_EXT = 1 K Ohm, CTM_EXT = 0.01 uF, VPRI_DC
= 380 V, ISEC_DC = 25.7 A
TINTERNAL ≤ 100ºC
1.27
V
28
mV
40
Enable / Disable Control
• The EN pin is a standard analog I/O configured as an input to an internal µC.
• It is internally pulled high to 3.3 V.
• When held low the BCM internal bias will be disabled and the powertrain will be inactive.
• In an array of BCMs, EN pins should be interconnected to synchronize startup and permit startup into full load conditions.
SIGNAL TYPE
STATE
ATTRIBUTE
SYMBOL
CONDITIONS / NOTES
ANALOG
INPUT
Startup
Regular
Operation
EN to Powertrain active
time
EN Voltage Threshold
EN Resistance (Internal)
EN Disable Threshold
tEN_START
VEN_TH
VPRI_DC > VPRI_UVLO+, EN held low both
conditions satisfied for T > tPRI_UVLO+_DELAY
REN_INT
Internal pull up resistor
VEN_DISABLE_TH
MIN
2.3
TYP MAX UNIT
250
µs
V
1.5
kΩ
1
V
BCM® Bus Converter
Page 10 of 25
Rev 1.7
07/2015
vicorpower.com
800 927.9474