PI2127 Datasheet, PDF (1/19 Pages) Vicor Corporation – 60 Volt, 12 Amp Full-Function Active ORing Solution


PI2127
Cool-ORing^® Series
60 Volt, 12 Amp Full-Function Active ORing Solution
Description
The PI2127 Cool-ORing^® is a complete full-function
Active ORing solution with a high-speed ORing
MOSFET controller and a very low on-state
resistance MOSFET designed for use in redundant
power system architectures. The PI2127 Cool-ORing
solution is offered in an extremely small, thermally
enhanced 7mm x 8mm LGA package and can be
used in high side, medium voltage Active ORing
applications. The PI2127 enables extremely low
power loss with fast dynamic response to fault
conditions, critical for high availability systems.
The PI2127, with its 8.5mΩ internal MOSFET
provides very high efficiency and low power loss
during steady state operation, while achieving high-
speed turn-off of the internal MOSFET during input
power source fault conditions that cause reverse
current flow. The PI2127 provides an active low fault
flag output to the system during reverse current,
excessive forward over-current and UVLO fault
conditions.
Features
• Integrated High Performance 12A, 8.5mΩ
MOSFET
• Very small, high density fully-optimized solution
with simple PCB layout
• Fast dynamic response to power source failures,
with 80ns reverse current turn-off delay time
• Accurate sensing capability to indicate system
fault conditions (-6mV reverse threshold)
• Internal charge pump
• Active low fault flag output
Applications
• N+1 Redundant Power Systems
• Servers & High End Computing
• Telecom Systems
• High-side Active ORing
Package Information
The PI2127 is offered in the following package:
• 17-pin 7mm x 8mm thermally enhanced LGA
package, achieving <10°C/W R_θJ-PCB
Typical Application:
Figure 1: PI2127 High Side Active ORing
Picor Corporation • picorpower.com
Figure 2: PI2127 response time to an input short fault
condition
PI2127
Rev 1.3
Page 1 of 19