EN1C11_15 Datasheet, PDF (1/13 Pages) Vicor Corporation – Component Power Front-end System for EN Compliance

ENMODS^™
EN1xxx
Each module:
2.28 x 2.2 x 0.5 in
57,9 x 55,9 x 12,7 mm
®
C
US
S
C NRTL US
Component Power Front-end System for EN Compliance
Features
• RoHS Compliant (with F or G pin style)
• Passive harmonic current attenuation
to EN61000-3-2
• 575 W rated power output
• Autoranging 115/230 Vac input
• Inrush current limiting
Product Highlights
The ENMod system is a new AC front-end
solution for compliance to electromagnetic
compatibility (EMC) standards. It consists of
the MiniHAM passive harmonic attenuation
module and the FARM3 autoranging AC-DC
front-end module. Combined with the filtering
and hold-up capacitors as specified herein, the
ENMod system provides full compliance to:
EN61000-3-2 Harmonic Current
EN55022, Level B Conducted Emissions
EN61000-4-5 Surge Immunity
EN61000-4-11 Line Disturbances
EN61000-3-3 Inrush Current
The MiniHAM is the first passive product
specifically designed for compliance to EN
harmonic current limits. Unlike active PFC
solutions, the MiniHAM generates no EMI,
greatly simplifying and reducing system noise
filtering requirements. It is also considerably
smaller and more efficient than active
alternatives and improves MTBF by an order of
magnitude. Optimized for operation on the DC
bus (provided by the FARM3) rather than
directly on the AC line, it will provide
harmonic current compliance at up to 600 W of
input power at 230 Vac.
The 115/230 Vac input FARM3 is a new
member of Vicor’s filter and autoranging
module product line that has been optimized for
use as the front-end for the MiniHAM. Both
modules are in Vicor’s standard Mini half-brick
package. Together with Vicor’s 300 V input
DC-DC converters, they form the basis of a low
noise, high efficiency, rugged, simple and
reliable EN compliant power system.
Absolute Maximum Ratings
Parameter
FARM3
L to N voltage
+Out to –Out voltage
BOK to –Out voltage
EN to –Out voltage
Mounting torque
Operating temperature
Storage temperature
Pin soldering temperature
Output current
Baseplate temperature
Rating
Unit
264
280
400
16
16
4 – 6 (0.45 – 0.68)
-40 to +100
-55 to +125
500 (260)
750 (390)
3.5
100
VRMS
VRMS
Vdc
Vdc
Vdc
in-lbs (N-m)
°C
°C
°F (°C)
°F (°C)
A
°C
Notes
Continuous
100 ms
6 each, 4-40 screw
H-Grade
H-Grade
<5 sec; wave solder
<7 sec; hand solder
Thermal Resistance
Parameter
Baseplate to sink
flat, greased surface
with thermal pad (P/N 20264)
Baseplate to ambient
Free convection
1000 LFM
Min
Typ
Max
0.16
0.14
8.0
1.9
Unit
°C/Watt
°C/Watt
°C/Watt
°C/Watt
Part Numbering
EN1
C
Product Type*
Product Grade Temperatures (°C)
Grade Operating
Storage
C = – 20 to +100 – 40 to +125
T = – 40 to +100 – 40 to +125
H = – 40 to +100 – 55 to +125
1
Pin Style**
1=Short Pin
2= Long Pin
S= Short ModuMate
N=Long ModuMate
F=Short RoHS
G= Long RoHS
1
Baseplate
1 = Slotted
2 = Threaded
3 = Thru-hole
*EN1 product includes one each MiniHAM and FARM3 with same product grade, pin and baseplate style.
**Pin styles S & N are compatible with the ModuMate interconnect system for socketing and surface mounting.
ENMODS™
Page 1 of 13
Rev 3.1
06/2015
vicorpower.com
800 927.9474