|
BC384R480T065VM-00 Datasheet, PDF (1/10 Pages) Vicor Corporation – BCM Array™ | |||
|
Features
⢠384 Vdc â 48 Vdc 650 W VI BRICKTM BCM Array
⢠Integrated heatsink simplifies
thermal management
⢠Vertical mount package reduces footprint
⢠High efficiency (>95%) reduces system
power consumption
⢠High power density (>290 W/in3)
⢠Contains built-in protection features:
undervoltage, overvoltage lockout, over
current protection, short circuit protection,
overtemperature protection
⢠ZVS/ZCS Resonant Sine Amplitude
Converter topology
⢠Can be paralleled to create multi-kW arrays
⢠Internal fuse and filter
⢠No output filtering required
TYPICAL APPLICATIONS
⢠High End Computing Systems
⢠Automated Test Equipment
⢠Telecom Base Stations
⢠High Density Power Supplies
⢠Communications Systems
BCM ArrayTM
BC384R480T065VM-00
Size:
3.54 x 0.56 x 1.13 in
89,9 x 14,2 x 28,7 mm
Vin = 360 â 400 V
Vout = 45 â 50 V (NO LOAD)
POUT = 650 W(NOM)
K = 1/8
Product Description
The VI BRICKTM BCM Array is a high efficiency (>95%) Sine Amplitude
Converter (SAC) operating from a 360 to 400 Vdc primary bus to
deliver an isolated 45-50 V nominal, unregulated secondary. The SAC
offers a low AC impedance beyond the bandwidth of most
downstream regulators, meaning that input capacitance normally
located at the input of a regulator can be located at the input to the
SAC. Since the K factor of the BC384R480T065VM-00 is 1/8, that
capacitance value can be reduced by a factor of 64x, resulting in
savings of board area, materials and total system cost.
Absolute Maximum Ratings
Parameter
+In to -In
PC to -In
+In/âIn to +Out/âOut
+In/âIn to +Out/âOut
+Out to -Out
Values
-1.0 to 440
-0.3 to +20
4242
500
-1.0 to +60
Unit
Vdc
Vdc
V
V
Vdc
Notes
Hi Pot
Working
VI BRICK BCM Array
BC384R480T065VM-00
vicorpower.com
Rev. 1.1
Page 1 of 10
|
▷ |