VC-801-DAW-E Datasheet, PDF (6/8 Pages) Vectron International, Inc – CMOS Crystal Oscillator

FREQUENCY
Date Code
Outline Drawing & Pad Layout
2.54
1.2
2.2
Dimensions in mm
Table 5. Pin Out
Pin Symbol
1
E/D
2
GND
3
Output
4
V
DD
1.4
Function
Enable Disable
Case and Electrical Ground
Output
Power Supply Voltage
Reliability
VI qualification includes aging at various extreme temperatures, shock and vibration, temperature cycling, and IR reflow
simulation. The VC-801 family is capable of meeting the following qualification tests:
Table 6. Environmental Compliance
Parameter
Conditions
Mechanical Shock
MIL-STD-883, Method 2002
Mechanical Vibration
MIL-STD-883, Method 2007
Solderability
MIL-STD-883, Method 2003
Gross and Fine Leak
MIL-STD-883, Method 1014
Resistance to Solvents
MIL-STD-883, Method 2015
Moisture Sensitivity Level
MSL 1
Contact Pads
Gold over Nickel
Typical Characteristics - Phase Noise and Gain Curve
Although ESD protection circuitry has been designed into the VC-801 proper precautions should be taken when handling
and mounting. VI employs a human body model (HBM) and a charged device model (CDM) for ESD susceptibility testing
and design protection evaluation.
Table 7. ESD Ratings
Model
Human Body Model
Charged Device Model
Minimum
1500V
1000V
Conditions
MIL-STD-883, Method 3015
JESD22-C101
Stresses in excess of the absolute maximum ratings can permanently damage the device. Functional operation is not
implied at these or any other conditions in excess of conditions represented in the operational sections of this datasheet.
Exposure to absolute maximum ratings for extended periods may adversely affect device reliability. Permanent damage is
also possible if E/D is applied before V .
DD
Table 8. Absolute Maximum Ratings
Parameter
Storage Temperature
Soldering Temp/Time
Symbol
T
S
T
LS
Ratings
-55 to 125
260 / 20
Unit
°C
°C / sec
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page6