VC-801-DAW-E Datasheet, PDF (5/8 Pages) Vectron International, Inc – CMOS Crystal Oscillator

Table 4. Electrical Performance, 1^P.8^eV^rO^fopt^rio^mn^{ance Specifications}
Parameter
Symbol
Min
Typical Maximum
Units
Voltage¹
Maximum Voltage
Current²
≤20.000MHz
20.001 to 70.000MHz
70.001 to 100.000MHz
100.001 to 125.000MHz
Supply
V
1.71
1.8
1.89
V
DD
-0.5
3.6
V
I
mA
DD
5
15
20
25
Current, Output Disabled
30
uA
Nominal Frequency³
Stability⁴, (Ordering Option)
Frequency
f
1.544
N
125.000
±20, ±25, ±32, ±50, ±100
MHz
ppm
Output Logic Levels^2,3
Output Logic High
Output Logic Low
Output Logic High Drive
Output Logic Low Drive
Output Logic High Drive⁵
Output Logic Low Drive⁵
Load
Output Rise /Fall Time²
<20.000MHz
20.000 to 50.000MHz
50.001 to 125.000MHz
Outputs
V
0.9*V
OH
DD
V
OL
I
2.8
OH
I
2.8
OL
I_OH
8
I
8
OL
I
OUT
t /t
RF
V
0.1*V
V
DD
mA
mA
15
pF
ns
10
6
3
Output Leakage, Output Disabled
I
Z
Duty Cycle^2,6
Period Jitter⁷
фJ
RMS
Peak-Peak
±10
uA
45
50
55
%
ps
3.0
21
RMS Jitter, 12kHz-20MHz
фJ
0.5
1
ps
Output Enable/Disable⁸
Output Enable
Output Disable
Disable time
Enable Internal Pull-Up Resistor
Enable/Disable
V
1.26
IH
V
IL
t
D
1
V
0.5
V
100
ns
Mohm
Start-Up Time
t
SU
Operating Temp, Ordering Option
T
OP
8
ms
-10/70 or -40/85
°C
1] The power supply should have by-pass capacitors as close to the supply and to ground as possible, for example 0.1 and 0.01uF.
2] Parameters are tested with production test circuit below , Figure 1.
3] See Standard Frequencies and Ordering Information tables for more specific information.
4] Includes initial accuracy, operating temperature, supply voltage, shock and vibration (not under operation) and aging for 50 and 100ppm options.
5] Overtone Designs, Output Frequencies>35MHz.
6] Duty Cycle is measured as On Time/Period (Fig 2).
7] Broadband Period Jitter measured using Wavecrest SIA3300C, 90K samples, see Application Note for Typical Phase Noise and Jitter Performance.
8] The Output is Enabled if the Enable/Disable is left open.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Page5