VS-502 Datasheet, PDF (5/8 Pages) Vectron International, Inc – Voltage Controlled SAW Oscillator

VS-502 Voltage Controlled SAW Oscillator
Table 4. Pin Out – Sinewave Option
Pin
Symbol
Function
1
V_C
VCSO Control Voltage
2
-
N/C
3
V_EE
4
Output
5
V_CC
Ground
VCSO Sinewave Output
Vcc2¹
6
V_CC
Vcc1
Table Notes:
1. If Vcc1 is +12V and a separate 5V is not applied to pin 5 then pin 5 must be connected through a 220Ώ 1/4W external resistor.
Suggested Output Load Configurations – SINEWAVE Operation
From PLL
NC
+12V
Vcc
0.1uF
1 ⁶ _{220 Ώ}
1/4W
25
0.01uF
34
0.01uF
Output AC Coupled with
50 Ώ to ground
From PLL
NC
+5V
0.1uF
Vcc
16
25
34
0.01uF
0.01uF
Output AC Coupled with
50 Ώ to ground
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
5
Tel: 1-88-VECTRON-1 Website: www.vectron.com
Rev: 27January06