VS-502 Datasheet, PDF (1/8 Pages) Vectron International, Inc – Voltage Controlled SAW Oscillator

Product Data Sheet
PRELIMINARY
VS-502
Voltage Controlled SAW Oscillator
Features
• Output frequencies from 300 MHz to 1350 MHz
• Ultra low jitter < 0.2 ps-rms (12 kHz to 20 MHz)
< 0.2 ps-rms (50 kHz to 80 MHz)
• Low phase noise, -160 dBc/Hz @ 1 MHz offset (1 GHz)
• Small low profile 9.0 * 14.0 * 4.5 mm SMT package
• 3.3 V, 5.0 V and 12V Supply Options
• LV-PECL, PECL, or Sinewave (0 to +10 dBm into 50 Ώ)
• Output disable feature (For LVPECL - PECL option)
Product is free of lead and compliant to
EC RoHS Directive
Applications
• Point to Point / Point to Multi Point Radios
• Instrumentation
• PLL Frequency Translation
• Test & Measurement
• Military & Avionics
Description
The VS-502 is a SAW based voltage controlled oscillator that
operates at the fundamental frequency of the internal SAW
resonator. This direct approach enables this series to achieve
low phase noise and jitter performance at high output
frequencies and over wide operating temperature range. The
oscillator is housed in a hermetically sealed J-lead surface
mount package offered on tape and reel. As an option, it has
an output disable to facilitate on-board test
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
1
Tel: 1-88-VECTRON-1 Website: www.vectron.com
Rev: 27January06