TFS243A Datasheet, PDF (5/5 Pages) Vectron International, Inc – Vectron International Filter specification

Filename: tfs 243a.doc
Vectron International
Version 2.1
Filter specification
TFS 243A
29.04.2011
5/5
History
Version Reason of Changes
1.0
- Generation of specification according to customer requirement specification.
2.0
- Add History.
- Change measurement condition (input power level from –10 dBm to 0 dBm,
termination impedance for input and output changed from 390 Ohm ║ -3,4 pF
to 400 Ohm ║ -3,1 pF to reflect improved accurace of measurement of this
parameter).
- Add commentary for termination impedances.
- Change remark for characteristic to reflect that the frequency shift over
temperature is included in the production tolerance sheme.
- Marking changed.
- Date code changed from month to week.
- Stability characteristic corrected.
- Packing information corrected.
2.1
- Reworked specification according to new specification layout
Name
Dr. Wall
Dr. Wall
Martens
Date
05/97
09.09.2002
29.4.2011
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.