English
Language : 

TFS243A Datasheet, PDF (3/5 Pages) Vectron International, Inc – Vectron International Filter specification
Filename: tfs 243a.doc
Vectron International
Version 2.1
Filter specification
TFS 243A
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per
plane, 3 planes; DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: three times max.;
for temperature conditions, see page 4: "Air reflow temperature conditions"
5. ESD
ANSI/ESD S20.20-1999, class 1A for HBM
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
2000
min. 300 mm
min. 500 mm
min. 300 mm
Tape (all dimensions in mm)
W
: 16,00 ± 0,3
Po
: 4,00 ± 0,1
t
Do
: 1,50 +0,1/-0
E
: 1,75 ± 0,10
F
: 7,50 ± 0,10
G(min) : 0,60
P2
: 2,00 ± 0,1
P1
: 12,00 ± 0,1
D1(min) : 1,50
Ao
: 7,60 ± 0,10
Ko
Bo
: 9,60 ± 0,10
Ct
: 13,3
Reel (all dimensions in mm)
A
: 330
W1
: 16,4
W2(max) : 22,4
N(min) : 50
C
: 13,0
A
Pull Off Direction
Do
PIN Marker
P1
Po
P2
Date Code
Typ
D1
Ao
W2
C
N
29.04.2011
3/5
W1
The minimum bending radius is 45 mm.
Air reflow temperature conditions
Vectron International GmbH & Co. KG
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@vectron.com
Vectron International GmbH & Co. KG reserves the right to make changes to the product(s) and/or information contained herein without
notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such
product(s) or information.