MO-9000A Datasheet, PDF (4/6 Pages) Vectron International, Inc – 1-110 MHz Low Power Oscillator

Pin FuncƟonality
Pin ConnecƟons
Pin Symbol
Func onality
1 OE/ ST Output Enable
H or Open*: specified frequency output L: output is high
impedance. Only output driver is disabled.
Standby
H or Open*: specified frequency output L: output is low (weak
pull down). Device goes to sleep mode. Supply current reduces
to I_std.
2 GND
Power
Electrical ground
3 OUT
Output
Oscillator output
4 VDD
Power
Power supply voltage
* A pull-up resistor of <10 kΩ between OE/ ST pin and Vdd is recommended in high noise environment
Top View
OE/ST ¹
4 _VDD
GND ²
3 OUT
Environmental
Environmental Compliance
Parameter
Condi on/Test Method
Mechanical Shock
MIL-STD-883F, Method 2002
Mechanical Vibra on
MIL-STD-883F, Method 2007
Temperature Cycle
JESD22, Method A104
Solderability
MIL-STD-883F, Method 2003
Moisture Sensi vity Level
MSL1 @ 260°C
Absolute Maximum RaƟngs
Maximum RaƟngs
Parameter
Storage Temperature
VDD
Electrosta c Discharge
Soldering Temperature (follow standard Pb free soldering guidelines)
Min. Max. Unit
-65 150 °C
-0.5 4
V
– 2000 V
– 260 °C
Thermal Data
Package
7050
5032
3225
2520
2016
Thermal ConsideraƟons
θJA, 4 Layer Board (°C/W) θJA, 2 Layer Board (°C/W)
191
263
97
199
109
212
117
222
124
227
θJC, Bo om (°C/W)
30
24
27
26
26
Page 4 of 6
Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com
Rev 1.2 Aug 2014