MO-9000A Datasheet, PDF (1/6 Pages) Vectron International, Inc – 1-110 MHz Low Power Oscillator

MO-9000A
1-110 MHz Low Power Oscillator
Features
• Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places
• Low power consump on of 3.6 mA typical
• CMOS compa ble output
• Industry-standard packages: 2.0 x 1.6, 2.5 x 2.0, 3.2 x 2.5, 5.0 x 3.2, 7.0 x 5.0 mm
Applications
• Ideal for DSC, DVC, DVR, IP CAM, Tablets, e-Books,
SSD, GPON, EPON
• Ideal for high-speed serial protocols such as: USB,
SATA, SAS, Firewire, Ethernet, etc.
Performance SpecificaƟons
Parameter and Condi ons
Symbol Min. Typ. Max. Unit
Condi on
Output Frequency Range
f
1
–
110 MHz
Frequency Stability
F_stab
-20
–
+20 PPM Inclusive of Ini al tolerance at 25°C, and varia ons over opera ng
temperature, rated power supply voltage and load.
-50
–
+50 PPM
Aging
Ag
–1.5
–
1.5
PPM 1st year at 25°C
Opera ng Temperature Range T_use
-20
–
+70
°C Extended Commercial
-40
–
+85
°C Industrial
Supply Voltage
Vdd
1.62
1.8
1.98
V Other supply voltages between 2.5V and 3.3V can be supported.
Contact Vectron for addi onal informa on.
2.25
2.5
2.75
V
2.52
2.8
3.08
V
2.7
3.0
3.3
V
2.97
3.3
3.63
V
Current Consump on
Idd
–
3.9
4.5
mA No load condi on, f = 20 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V
–
3.6
3.9
mA No load condi on, f = 20 MHz, Vdd = 1.8V
Standby Current
I_std
–
2.5
5
μA ST = GND, Vdd = 3.0V or 3.3V, Output is Weakly Pulled Down
–
2.5
5
μA ST = GND, Vdd = 2.5V or 2.8V, Output is Weakly Pulled Down
–
1
1.2
μA ST = GND, Vdd = 1.8V, Output is Weakly Pulled Down
Duty Cycle
DC
45
–
55
% All Vdds
Rise/Fall Time
Tr, Tf
–
1.2
2
ns 20% - 80% Vdd = 2.5V, 2.8V, 3.0V or 3.3V
–
1.5
3
ns 20% - 80% Vdd =1.8V
Output High Voltage
VOH
90%
–
–
Vdd IOH = -4 mA (Vdd = 3.0V or 3.3V) IOH = -3 mA (Vdd = 2.8V and Vdd =
2.5V) IOH = -2 mA (Vdd = 1.8V)
Output Low Voltage
VOL
–
–
10%
Vdd IOL = 4 mA (Vdd = 3.0V or 3.3V) IOL = 3 mA (Vdd = 2.8V and Vdd =
2.5V) IOL = 2 mA (Vdd = 1.8V)
Input High Voltage
VIH
70%
–
–
Vdd Pin 1, OE or ST
Input Low Voltage
VIL
–
–
30%
Vdd Pin 1, OE or ST
Input Pull-up Impedence
Z_in
–
100
250
kΩ Pin 1, OE logic high or logic low, or ST logic high
2
–
–
MΩ Pin 1, ST logic low
Startup Time
T_start
–
–
5
ms Measured from the me Vdd reaches its rated minimum value
Resume Time
T_resume –
–
5
ms Measured from the me ST pin crosses 50% threshold
RMS Period Ji er
T_ji
–
2
3
ps f = 20 MHz, Vdd = 2.5V, 2.8V, 3.0V or 3.3V
–
2
4
ps f = 20 MHz, Vdd = 1.8V
RMS Phase Ji er (random)
T_phj
–
1.5
2
ps Integra on bandwidth = 12 kHz to 20 MHz
Page 1 of 6
Vectron Interna onal • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • h p://www.vectron.com
Rev 1.2 Aug 2014