TFS161A Datasheet, PDF (3/5 Pages) Vectron International, Inc – Specification

TELE FILTER tft GmbH / Potsdamer Straße 18 / D 14 513 TELTOW
telephone: [phone] / telefax: ([phone] / e-mail: [e-mail]
t_{_}fs_{_}1_{_}6_{_}1_{_}a_{_}.d_{_}o_{_}c_{________________________________________________________________________________________}0_{_}4_{_}/9_{_}7_{______}
T_{__}E_{__}L_{_}E_{___}F_{__}IL_{__}T_{_}E_{__}R_{___}t_{_}f_{_}t_{__}G_{__}m_{__}b_{__}H_{_____________________}s_{__}p_{_}e_{__}c_{_}i_{_}f_{_}ic_{__}a_{_}t_{_}i_{_}o_{_}n_{_____________________}T_{__}F_{_}S_{___}1_{__}6_{_}1_{__}A_{___}-_{_}3_{__}/4_{____}
Stability characteristics
After the following tests the filter shall meet the whole specification:
1. Shock:
30g, 18 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 150 Hz, 0.35 mm amplitude, 5g; 2 hours for 3 planes;
DIN IEC 68 T2 - 6
3. Damp heat:
90 % to 95 % rel. humidity, 40 °C, 10 days;
IEC Pub. 68 - 2 - 3
4. Resistance to
solder heat (Reflow):
260 °C for 10 sec;
Packing
Tape & Reel:
DIN IEC 286 - 3, with exception of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters per reel: 2300
Tape (all dimensions in mm)
W
: 16 ± 0,3
Po : 4 ± 0,1
Do : 1,5 + 0,5
D1 : 1,5 + 0,5
E
: 1,75 ± 0,1
F
: 7,5 ± 0,1
G (min) : 0,75
P2 : 2 ± 0,1
P1 : 12 ± 0,1
D1(min) : 1,5
Ao : 7,6 ± 0,1
Bo : 9,6 ± 0,1
13,4 ± 0,1
COVER TAPE
EMBOSSED CARRIER TAPE
Do
Po
P2
Ao
D1
Bo
E
F
W
G
P1
Reel (all dimensions in mm):
A
:
330
W1
:
W2 (max) :
16,4 +2
22,4
N (min)
: >= 90
C
C
:
13
± 0,25 ^A
W2
N
W1
The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The
marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side
of the tape.