VS700_09 Datasheet, PDF (1/7 Pages) Vectron International, Inc – Voltage Controlled SAW Oscillator

VS-700
Voltage Controlled SAW Oscillator
VS-700
Description
The VS-700 is a SAW based voltage controlled oscillator that operates at the fundamental frequency of the internal SAW filter.
The SAW filter is a high-Q quartz device that enables the circuit to achieve low phase jitter performance over a wide operating
temperature range. The oscillator is housed in a hermetically sealed leadless surface mount package offered on tape and reel. It
has an output disable to facilitate on-board testing.
Features
Applications
• Industry Standard Package, 5.0 x 7.5 x 2.5 mm
• Output Frequencies from 500 MHz to 850 MHz
• 3.3 V Operation
• Low Jitter < 0.25 ps-rms across 50 kHz to 80 MHz
• LV-PECL Configuration with Fast Transition Times
• Complementary Outputs
• Output Disable Feature
• Product is free of lead and compliant to EC RoHS Directive
PLL circuits for clock smoothing and frequency translation
Description
Standard
• 1-2-4 Gigabit Fibre Channel
INCITS 352-2002
• 10 Gigabit Fibre Channel
INCITS 364-2003
• 10GbE LAN / WAN
IEEE 802.3ae
• OC-192
ITU-T G.709
• SONET / SDH
GR-253-CORE Issue4
• WiMax
IEEE 802.16
Block Diagram
Vcc COutput Output
SAW
Vc
OD
Gnd
Page1 of 7
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Rev: 08Dec2009