English
Language : 

MJE13009-Q Datasheet, PDF (4/4 Pages) Unisonic Technologies – NPN BIPOLAR POWER TRANSISTOR FOR SWITCHING APPLICATIONS
MJE13009-Q
Preliminary
NPN SILICON TRANSISTOR
 TEST CONDITIONS FOR DYNAMIC PERFORMANCE
Table 1. Test Conditions for Dynamic Performance
REVERSE BIAS SAFE OPERATING AREA AND INDUCTIVE SWITCHING
RESISTIVE
SWITCHING
BVCEO (SUS)
L=10mH
RB2=8
VCC=20V
IC(PK)=100mA
Inductive
Switching
L=20mH
RB2=0
VCC=15V
RB1 selected
for desired IB1
RBSOA
L=500mH
RB2=0
VCC=15Volts
RB1 selected
for desired IB1
VCC=125V
RC=25Ω
D1=1N5820 OR EQUIV
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R223-026.a